Jump to content

Recommended Posts

Hello!

 

Had an extra day off and was out for a ride, I'd done about 18 miles or so when my speedo failed, needle just read zero. Soon after the engine cut out at low speed (maybe I just stalled it) and I couldn't restart it.

 

The dash lights come on, fuel pump whines etc. but when I press the starter button they all turn off, then after a pause there is a clicking sound.

 

Recovery guy reckoned it is the battery?

Any advice appreciated :) 

Link to post
Share on other sites

I think I agree with the recovery chap. Sounds like the battery has just died. 

 

Test it under load. Off load they can still show decent voltage but collapse as soon as any load is put on it.

  • Thanks 1
Link to post
Share on other sites

I had similar on my GSX600F, it was a bad connection on the earth lead.

Some lights still worked because they found an earth path through other ways, but it wouldn't start.

Test the battery with a a bulb, headlight bulb is ideal - it will draw about 4 amps which will gve it a good test.

If bulb is bright for a few minutes then baterry is good.

If battery is good, look fo ra bad connection.

If battery is bad, you need to work out if its the battery or charging system.

Charge the battery up and try it out. if it still bad then replace battery.

If battery now looks good, check the voltage with engne running, should be at leasyt 14V.

 

 

 

  • Like 1
  • Thanks 1
Link to post
Share on other sites

Yup could well be the battery give it a charge first before replacing and test it if you can and also try starting the bike with a known good battery or jumping it if you can 

 

The check to make sure its charging 

 

Also there is a bunch of wires on the right hand side of the bike that runs underneath the ram air snorkel these are known for collecting water and suffering with corrosion 

Link to post
Share on other sites
37 minutes ago, Liveware Problem said:

Cheers for the replies :)

 

Just wondering, is the speedo issue likely linked, and if so would it be fixed by finding and fixing the electrical/battery issue?

Low voltage will often throw instrument issues. I'd start by checking the battery as it's the simplest item to sort. If that checks out ok then move onto the connectors, charging system etc. 

 

The last time I had something similar it was the battery just letting go. It was fine in the morning, then just suddenly died in the afternoon.

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.