neilzomg

Lifan samurai 125 both exhausts are on the way out. A new set of exhausts will hit me close to £500. Is there any way i can buy some form of a downpipe, and then use a can? or some other exhaust that might fit it.

If it badly aligned could it do something to it as im 100% sure its badly off. Im planning on leaving it in to get a lot of work done, new suspension, chain, sprockets, new bearings etc to get everything ruled out it needs a good service. I get the work done cheap anyway, a guy i know fixes it for me for next to nothing if i provide the parts. Neil.

Was traveling home last week and the back wheel inside where the brake shoes were smoking. I was working on it and could have been a posibility that i overtightened the axle as the wheel looks like it was rubbing against the brake housing. The'res no noise from the wheel and the bearings looked fine and didn't seem to be anything wrong with the wheel or brake shoe housing. could i just have overtightened the axle?

Yeah, i was thinking of getting those 35/35 watt lights to stick on, i actually ordered a set but they were out of stock and got refunded. If i could get two LED lights light suggested, maybe not as powerful link them up as running headlights to give some extra vision might be a good idea.

So i have wait for it, a lifan LF 125 samurai. The stock lights were terrible anyway, but had to be removed and converted to streetfighter as the plastics were in terrible shape, would have cost the price i paid for the bike to replace. But anyway, they're running two 18/18w P15D. I did a little mod connected up H7 50w lights on it, but it was just stuck on the same beam setting but did make it brighter. i've seen some P15D LED headlights too, would something like that work?

I have a bracket that i took off where the original speedo was attatched. But the only problem is, i can't put the headlight on with it attatched as it gets in the way. Unless it was altered, or copied in a way that it wont cause any space issues on the bike

No problem cheers for the info!

Just noticed two tubes literally hanging off my engine.. One seems to be coming from the carb and the other from the bottom of the engine. images below if anyone has any idea what they are. Have had the bike for a few months with no running problems except it doesn't like to start when its been left outside in the cold for a while. http://s15.postimg.org/qpjgpbslz/DSC_0335.jpg http://s15.postimg.org/8lgg4ouxj/DSC_0336.jpg

Ha! not sure how id go about doing that unless, i took the whole top yoke off and just did a stencil?

This is the one i've ordered, wanted this kind of style of speedo! http://42.120.44.200/ebaypic/boao/boaol ... T140/2.jpg

Turned the bike streetfighter, as the person who owned it crashed it and the pastics were cracked and being held together. So the easiest option was to scrap the whole front plastic fairing and just streetfighter it. I prefer the look of it now, But i just have a few problems. The speedometer was wrecked anyway so i removed it, the tachometer didnt work and either did the fuel gauge. so I removed that, and have another single universal speedo unit on its way. I just cant think of a way to mount it on the bike. http://s15.postimg.org/oz8m1i2zb/DSC_0332.jpg http://s15.postimg.org/xwtbyuvfb/DSC_0333.jpg http://s15.postimg.org/8cr1sfa1j/DSC_0334.jpg

Does it matter about the connections to the headlights, can they be modded in some way as well?

I have a lifan LF 125-30, the guy i bought it off crashed it and i've had a friend do a lot of mechanical work, welding replacing fork seals.. more welding.. drilling out manifold exaust bolts etc. The next problem is the plastics. The whole front is cracked, and id need a whole new set costing probably around 250 around that with the research i've done online. Now i've been looking into changing it to a streetfighter look, and my friend who fixes it recommended it as all i'll need for it is the headlight and bracket. Seems like a very easy mod, pop a bracket on and wire it up. But where will all of the wires be stored to protect them? then i can go ahead and get it ordered

I'm wondering if anyone can point me into the right direction for the correct light bulbs for this scooter. I bought it over a week ago and the bulbs fitted at 12v 15 watt headlight bulbs and I'm just wondering if they're correct as they don't seen to be bright enough on the road at night! Neil.