Jump to content

mr1

Registered users
  • Posts

    38
  • Joined

  • Last visited

Everything posted by mr1

  1. mr1

    oil leak

    Hi I have a gsxr 1000 k1 and its got a small oil leak. There's oil around the bottom of the water pump any ideas or does anyone know of a common fault around that area of the engine ?
  2. mr1

    2001 GSXR 1000 K1

    Cheers for the heads up mate, I was thinking more along the lines of maybe a later gsxr do you know if they would fit ?
  3. mr1

    2001 GSXR 1000 K1

    Cheers, i did look on ebay but they are are in Hong Kong and it says something about having to pay excise to customs when they arrive, not to sure about all that
  4. mr1

    2001 GSXR 1000 K1

    Hi, does anyone know if there's any mirrors with built in indicators that will fit a gsxr 1000 k1 (2001)
  5. mr1

    gilera dna 50

    Hi, the water level was low because a pipe had come off but refitted and all seems ok on that side of things. The bike ticks over for ages with no problems but as soon as you ride it it stalls after a few mins, when belt snapped he turned it straight off so I don't think he damaged anything ?
  6. mr1

    gilera dna 50

    Help please, my son's dna 50 snapped a belt I've replaced it and now the temp gauge flashes with no bars then it rises and flashes then after a 5 minute ride it stalls and won't turn over then leave it a few mins and it turns over and runs ok, I'm stumped any idea's ?
  7. mr1

    help plz

    Thanks guys,he is going to strip it and see what's gone on,alot if grief for trying to get an extra horsepower lol
  8. mr1

    help plz

    Hi,a friend of mine owns a sinnis apache 125 ,he removed the emission control valve on the cylinder head and blanked off the hole,after a short ride the bike kept cutting out when he got it running again it had a horrible knocking noise he's put the valve back but still has the knocking,we have both puzzled over this and he is a car mechanic but we can't figure out what is causing the knocking?????? HELP PLEASE
  9. mr1

    help plz

    thank chaps,he is only sixteen but it looks totally standard and I only managed to get 44 mph out of it,I know it's still wrong but I think 30 mph is dangerous
  10. mr1

    help plz

    Hi fellas,haven't been on for awhile and need a bit of help! Right just bought my son a gilera DNA 50cc that's had a 70cc kit fitted and it has a standard exhaust ,when I rode it it feels slow and hangs back a bit,was told by the bloke I got it from that it could do with a bigger jet,would this help and if so what size would I need to get :-S
  11. Mate try draining the float bowls,on my fazer I changed plugs coils plug caps then someone suggested draining the float bowls and guess what it only effing cleared it !!!
  12. mr1

    some advice plz

    Just been quoted £65 to do chain and sprockets,is that reasonable? i'm supplying the parts !
  13. mr1

    some advice plz

    Cheers mate will do
  14. mr1

    some advice plz

    yeah I guess,but havnt got suitable tools,not gonna go and buy a chain splitter and then find I can't do it anyway
  15. mr1

    some advice plz

    Looks like I'll be paying someone to do then :'(
  16. mr1

    some advice plz

    On a scale of 1-10,1 being easy,how difficult is it to change chain & sprockets on a 98 fazer 600
  17. mr1

    help

    Thanks for your help chaps,I'm gonna go get a 27 mil,that looks about right fingers crossed
  18. mr1

    help

    havnt got a vernier gauge and can't get a very good measurement with a tape measure as I can't get it off !
  19. mr1

    help

    Does anyone know the rear wheel nut size on a 98 fazer 600
  20. mr1

    plug gaps

    No mate not kept on a charger and works only about five miles,but I do try to get out on it every day and do 20/30 miles,just this weather is a joke
  21. mr1

    plug gaps

    set plugs to the number 8 gauge,bike started fine but usually does on first start up,the problem is that I ride to work in the morning and when I finish work it seems to crank over for ages so I have to release starter button 3 or 4 times till finally it starts,couldn't be arsed to take it out today tho will see what happens when I use it on Tuesday as I got a day off tomorrow,yay
  22. mr1

    plug gaps

    fairly new,I had a whole heap of misfire probs,so I replaced coils plugs plug caps,and it was no better,so someone suggested draining gloat bowls and it cured it,but now it somtimes struggles to start,that's why in checking the gaps
  23. mr1

    plug gaps

    cheers mate,seems like my gaps are way to wide,I thought it was that but as gaps are that wide I thought I better consult the Oracle,lol
  24. mr1

    plug gaps

    Right guys need a quick answer if poss ,manual says plug gap should be 0.7/0.8 ,is that 7 or 8 on a feeler gauge :-S
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up