Doom64

Just sorted out insurance, first I rang up a big insurance company but it seemed to have taken them three days to refer my policy request to a specialist so I got a quote from mce online and chose the 'non standard engine' option the total price was £358 I bought it looked at my policy docs but it still said 248cc so I rang them up and told them it should be 497cc I had to pay an extra £20 for the change but they changed it straight away and I got the updated docs. They didn't even ask for an inspection or any other documents. Hopefully they won't later. First part out the way hopefully dvla will go just as easy.

Thanks, I hope it does to, spent a lot of time doing it.

Thanks, I would put a 500 badge on it but I want to surprise a few people Yeah I have heard about the starter gear going wrong but the engine didn't have one fitted when I bought it and they are pretty hard to come by so I fitted the kick start shaft from my 250 engine inside it so it is kick-start only now. I still need to fit the decompression setup to make kicking it over a bit easier though.

Some pics.

Can't help with DVLA advice but I'd love to see some pictures of the bike ! I'm a big fan of the FT having owned two of them in the past and I've also owned a CB250RS . What's the story ? Does that mean there's an FT knocking about with no engine ? I've just done an engine swap myself but it was out of the same size of bike ( ER5 ) I'd better get round to telling DVLA myself, thanks for the reminder . Well I got the cb250rs a couple years ago and was reading about them online and saw people used to put 500cc engines in them and since then I wanted to do the same:) last August there was an ft500 engine for sale on eBay and I won it for £168 bargain! Swapped the engines over with a bit of persuasion and violla. Definitely worth swapping over, the 250 is so light and with a 500 engine in it, it goes lovely. Unfortunately no empty ft laying about. Let me know how the dvla respond though. Thanks for the replies. Do you think an up to date mot would be enough? That would prove it's Road worthy. Rang up an insurance company today but have to ring back tomorrow for a quote will have to see what sort of price they come up with.

Hello I recently put an ft500 engine in my cb250rs, does anyone know if on the insurance site the 'non standard engine' covers engine swaps or is it different standard engine internals that it covers? Also has anyone had any experience dealing with the dvla and telling them about engine swaps? Does it go very smoothly? Or can they be picky with information they need? Thanks.

Hello, has anyone got a set of ft500 downpipes that they want to sell, I need a set for a cb250rs conversion but I can't find any. Thanks.

Thanks for the tips, thought I put something together wrong.

Yes it's that type now, just loosened the chain, undone the two front sprocket bolts, took the sprocket off the spindle and took the chain off.

Hello, I took the rear wheel off my cb250rs to change the sprocket and chain, and clean the rear hub. I put it all back together, adjusted the chain and tightened the rear wheel nut up but as you tighten it up the chain tightens as well, does anybody have any ideas as to what it could be?

Thanks, the seller sent me the proper link and it arrived today. I think you have to remove it, could you loosen the chain all the way and get the chain off the front speocket?

Hello, I ordered a new x ring chain for my cb250rs, it was supposed to be a split link but a rivet link came with it. I am testing different speockets at the moment so I don't want to rivet it in at the moment, would it be possible to swap the rivet master link to a split link as long as it's still got o rings in it instead? The chain on it at the moment has a split link.

could I have buggered the timing up by doing the tappets?

Yep leads are on the right way. And when Turning the engine over you can use the nut with the timing mark on to get tdc can't you? And you have to make sure cylinder 2 and 3 are at tdc? because cyclinder 1 and 4 are at tdc at the same time.

It is points. I read when you can wiggle the tappets you can adjust them. How do I make sure it's at the tdc?