Fatsam
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Community Map
Everything posted by Fatsam
-
Kawasaki ninja 250r. MOT April 2018. 25000 miles. Recent service. Mirror extensions. New brake pads. Superb fun bike to ride. £1395. Umberleigh, Devon. Kawasaki ninja 250r. MOT April 2018. 25000 miles. Recent service. Mirror extensions. New brake pads. Superb fun bike to ride. £1395. Umberleigh, Devon.
-
Hi all. Can anyone tell me what other shocks will fit ninja 250r 2008. I'm looking for one as cheap as possible. They seem rather expensive. Thanks
-
OK thanks.
-
Hi folks. I'm gonna service the bike . 10w 40 semi synthetic is what's required. What are your views on castrated magnatec?
-
Thanks all. No not changed anything, although I think I would do oil and filters.
-
Any cure for that Hoggs?
-
Hi Folk, what would cause slight hesitation when I open throttle, (zx6r f1 1995) Start from cold on choke, try to rev and it cuts out (didn't do this before) then after choke is off it seems to hesitate before it picks up. (Didn't do this before either) But then seems ok after about 5 miles. Any ideas?
-
Problem solved people. It turned out to be some corrosion in number 4 plug cap around the resister. The simplest things eh. Also the rattle I had has sorted itself after I took the cam chain tensioner out and reset it. Thank you for all the replies guys.
-
Yes good point. Any more suggestions greatly appreciated.
-
Thanks Mate.
-
Tensioner still doing its job, put it all back together and started bike up. Still running like one cylinder not working. I've cleaned and gapped plugs also checked each plug on ohms meter. Got readings of 4.0. 4.32. 3.95. And. 3.62. Any ideas? Please They are 5k resister plugs
-
Yes it has carbs. What's icing Mate?
-
Ah, interesting. No I took outer bolts out first, I'll re fit later and try centre bolt. Makes sense that. Thank you, I'll be back on soon with result.
-
Ok folks, I took cam chain tensioner out and it's at maximum (64mm) could I just swap for a manual tensioer or does it mean chain replace?
-
ThanksMate, I darent start it now because of the rattling noise. Need it looked at.
-
Hi guys, went out on the bike yesterday and all was fine. Stopped at a friends for an hour got back on and off I went. Zx6r 1995. Engine felt it had a vibration like it was running on 3 cylinders and when you throttle down was randomly back firing. Power seemed be there but doesn't feel right. Also a rattling seems to be front right of engine when idling. Any ideas?
-
So my Mrs. and Me want bike to bike radio coma with voice activated Mics. What do you recommend?
-
Brilliant, thanks
-
Hi all, does anyone know the size of the nyloc nuts on the rear shock assembly for 2008 Ninja 250r? Please
-
Cheers Stu
-
That's what I'm thinking too, Cheers
-
can anyone tell me if the rear shock on ninja 250r 2007 is the same as the 2008?
-
Thanks Guys, I'll start phoning
-
Anyone know where I might pick one up?
