Jump to content

Carter101

Registered users
  • Posts

    13
  • Joined

  • Last visited

Personal Information

  • Gender
    Male
  • Bike(s)
    Honda Cbr125r

Carter101's Achievements

0

Reputation

  1. Hi guys. I have a honda cbr125r 2004 model and basically the engine that's in it is not worth repairing. (Costs way to much) I have found an engine to buy but it is from a 2007 model which is fuel injected rather than carb. Does anyone know if there Is any differences between these 2 engines? Will there be any problems or will it connect straight up? Thanks.
  2. Hi guys. Got a question would to much pressure in the crankcase cause a bike to not start?
  3. Hi guys. Can anyone recommend a good battery charger that is quite cheap as well. I need it for a 12v 6amp battery and a 5 amp battery. As they are both a little flat. Thanks.
  4. Haha nope it was stuck on there pretty bad. Have now manged to get it off
  5. OK thanks. I'll try that and hopefully It will eventually come free. If you need any advice on servicing it when you do get it out let me know, I did one recently. Thank you. That would be helpful. I'll let you know how it goes when I've attempted to get the starter motor off
  6. I've got the alternator cover off yes. I've tried popping it out from that way as well but it still won't move Ok, I can only suggest trying to knock it one way and another until you free the seal where it plugs into the casing. It's in a fairly exposed location so maybe a bit of corrosion has set in . Try some penetrating oil and then jiggle it up and down whole tapping it from the alternator side . Don't hit anything directly with a metal hammer though like in the useless video I found. Good luck. OK thanks. I'll try that and hopefully It will eventually come free.
  7. I've got the alternator cover off yes. I've tried popping it out from that way as well but it still won't move
  8. Hi everybody. I'm having some real trouble with my Honda cbr125r. I have managed to diagnose that the starter motor is not working. Now the problem is that I can't get the thing off the engine to change it. I have taken all the necessary bolts off but the thing won't budge at all I've even hit it with a hammer a few times but still nothing. Does anyone have any suggestions? As it's really annoying me now and I can't ride it until I take the old one off and put the new one I have on. Thanks
  9. I changed the carb because old one was cutting out when I took choke was off and also fuel/air screw was missing
  10. I set the idle speed when it was fully warmed up. Yes it does it everytime and takes a minute or two to turn back on.
  11. The new carb is stock. I have set it to factory settings. Also the clutch is free because I can put it in first and it rides but then the bike just cuts out when slowing down
  12. I have set the idle to the right speed. I also have put a brand new carb in it.
  13. I have a problem with my 125cc. I can put it in first and it rides well but then when i come to a stop and drop it to first it completely stalls and takes a few mins to turn back on. Any help on this would be great. Sorry if this post is in the wrong place not sure where to put it.
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up