Jump to content

julianl

Registered users
  • Posts

    71
  • Joined

  • Last visited

Everything posted by julianl

  1. Now the end is in sight with the CB350G, I'm itching to get started on the next project. I have this '80 CG125 and a '03 XR125L to choose from. I think it might be the CG next.
  2. Also, I hadn't bled the brakes yet (or filled them with brake fluid) because the M7x1.00 bleed nipple I ordered was in fact an M8x1.25 one when it turned up, so I had to order another one.
  3. https://i.imgur.com/q4rHpNg.jpg' alt='IMGUR>'> Ordered the right connectors this time. Got a straight and a 20 degree, they were about £3/each so I can try them both and go with the best fit. https://i.imgur.com/QMyZ0vA.jpg' alt='IMGUR>'> The 20 degree one seems the best. https://i.imgur.com/qPuAzeD.jpg' alt='IMGUR>'> Added a P-clip where the old hydraulic pressure switch was, just to stop the hose rubbing. https://i.imgur.com/oAa5GBF.jpg' alt='IMGUR>'> Also swapped over the plastic headlight lens for a glass one. I know it doesn't make much difference, but the plastic one just looked out of place to me. https://i.imgur.com/Zh8khYS.jpg' alt='IMGUR>'> Much better.
  4. I found a company that makes self-service custom brake lines. They sell the line in load of different lengths, so you buy the one you need. The line is braided (I chose a black PVC outer so it doesn't stick out on an old bike like this) and has a standard connector on each end. You then buy an adapter for each end of the hose for what you need. I needed a 10mm banjo on one end and an M10x1.25 thread on the other. This would allow me to go direct from the master cylinder to the caliper. I could then use a banjo bolt with a hydraulic switch for the front brake switch. https://i.imgur.com/Gn4qqRS.jpg' alt='IMGUR>'> Braided brake line. https://i.imgur.com/f8JJmjx.jpg' alt='IMGUR>'> This is the M10 threaded connector attached to the hose. https://i.imgur.com/iPUUwvk.jpg' alt='IMGUR>'> On the bike. https://i.imgur.com/NfpQ4NG.jpg' alt='IMGUR>'> Attached to the caliper. https://i.imgur.com/zvLb6Y9.jpg' alt='IMGUR>'> This is where I made a bit of a balls up. I ordered a 90 degree 10mm banjo connector when I needed a straight or shallow angle one. The joint gives you a 90 degree bend anyway, and I didn't take that into account. Oh well, the connector was only about £3.50, but it is lost time. I decide to press on with the electrics instead. I really didn't like the after market ignition switch, so bought an OEM one off eBay. https://i.imgur.com/a1nzL1c.jpg' alt='IMGUR>'> Crappy generic and 'new' OEM one. https://i.imgur.com/UrW66n3.jpg' alt='IMGUR>'> But the OEM one didn't have the loom connector on it. Luckily the crappy one did. Time for surgery. https://i.imgur.com/2RzAIZL.jpg' alt='IMGUR>'> Removing the old wires. https://i.imgur.com/b50ws6U.jpg' alt='IMGUR>'> Flux pen. https://i.imgur.com/qwmbmXw.jpg' alt='IMGUR>'> Splice. https://i.imgur.com/uZ5CH7k.jpg' alt='IMGUR>'> Properly spliced, wiring harness tubing added, and the rubber covers back on. Just need to solder it back to the ignition switch. https://i.imgur.com/odvrYaT.jpg' alt='IMGUR>'> Proper job. https://i.imgur.com/TY1kzku.jpg' alt='IMGUR>'> Nice. https://i.imgur.com/Sm35F5S.jpg' alt='IMGUR>'> And also nice. https://i.imgur.com/kt6v3bv.jpg' alt='IMGUR>'> Installed on the bike and all works. Testing park here.
  5. This bike differs from my 1970 CB350K Twin in that it has a hydraulic front disc brake, the only CB350 Twin model year to have this, all the four cylinder CB350F bikes have it. It's a little unusual as the brake hose is made up of three parts, an upper hose, a lower hose, and a hard line to the caliper. There's also a manifold in the middle with a hydraulic brake switch (this is the factory configuration). https://imgur.com/j4AV0BN (Click to play video). The upper front brake hose. After seeing this, I ordered a replica brake line kit from the US. This was actually pretty cheap (about £20), but took about 1.5-2 weeks to get here. https://i.imgur.com/xrHZR24.jpg' alt='IMGUR>'> Here's the manifold in the middle with the upper hose and lower hose (removed). The brake switch is on the rear of it. https://i.imgur.com/Ns3brQK.jpg' alt='IMGUR>'> Naturally I didn't think about having changed the bars until about a week after I'd ordered it. https://i.imgur.com/gzPvvBA.jpg' alt='IMGUR>'> I tried routing the old upper hose round the front and round the back of the forks, but it just wasn't long enough. https://i.imgur.com/eM668iK.jpg' alt='IMGUR>'> This was confirmed that I didn't have an especially short one when the replica hose set turned up, and it was equally as short. Arse. This hose was 330mm long and I needed about another 30mm. So I start looking at random bike's rear brake hoses on eBay... (Don't worry, I've already resolved this, as you will see in the next update).
  6. Thanks Fastbob We did see a few people out on big adventure bikes, but they were going no faster than we were. They would disappear, but then we'd catch them up again when they stopped. I'm used to wild camping (which we did a couple of times on the transit legs of the journey) so camping in a camp ground was luxury in comparison. I went camping on Dartmoor about 3 years ago with the XR, but that was only about 400 miles round trip. It was also before I had the after market rack, so I just had some cheap eBay saddle bags.
  7. https://i.imgur.com/2ezGHUd.jpg' alt='IMGUR>'> Clutch lever, barrel adjuster, lock nut, and a pivot bolt this time too. https://i.imgur.com/FOkdfix.jpg' alt='IMGUR>'> All fitted on the bike. https://i.imgur.com/CR71FX4.jpg' alt='IMGUR>'> Headlight working. I am a little worried about the depth of the headlight as I plan to run an LED H4 headlight, as an upgrade and less of a draw on the older charging system, will have to see if the LED and associated heat sink will fit in this bucket. https://i.imgur.com/UTv3OvQ.jpg' alt='IMGUR>'> Neutral light working. https://i.imgur.com/iX0tHX5.jpg' alt='IMGUR>'> Clocks backlight turn on with the headlights. https://i.imgur.com/7YolAlO.jpg' alt='IMGUR>'> The right hand headlight bracket is bent. I've tried bending it back but it won't budge. I've ordered a NOS one (which cost and arm and a leg, all the second hand ones I could find were bent too), but it's coming from the US (great, more import and VAT to pay).
  8. Indicator wiring this time. https://i.imgur.com/94QNqoU.jpg' alt='IMGUR>'> First, I sorted out this badly crimped live wire. Crimped and soldered for good measure. https://i.imgur.com/SMTzKTC.jpg' alt='IMGUR>'> New grounds for the rear indicators, as they are rubber mounted. https://i.imgur.com/QxdpW04.jpg' alt='IMGUR>'> New generic flasher relay. https://i.imgur.com/3QQVa2G.jpg' alt='IMGUR>'> Wired up and installed. https://i.imgur.com/j9gKwhj.jpg' alt='IMGUR>'> Test rear left. https://i.imgur.com/9Pul6mM.jpg' alt='IMGUR>'> Test rear right. https://i.imgur.com/FpolXyA.jpg' alt='IMGUR>'> Test front right. https://i.imgur.com/BBJ2os3.jpg' alt='IMGUR>'> Test front left.
  9. Anyone with one of those green chopping board things knows their stuff. Oh absolutely. Thanks
  10. Working on the handlebars and controls. Also swapping out one of the indicators as it had a manufacturing defect (spot weld popped during transit). https://i.imgur.com/mrG8cYo.jpg' alt='IMGUR>'> Bar end mirrors, replacement indicator, and right hand switch gear. https://i.imgur.com/AyqxoKg.jpg' alt='IMGUR>'> Replica bars with the correct holes for the wiring. New bars were so much cheaper than rechroming the old ones. I have the edges a bit of a file so they don't shed the new wiring. https://i.imgur.com/MYib9Tz.jpg' alt='IMGUR>'> This is so much easier than when I did this on my '70 CB350. That bike had surface rust inside the bars, this is nice and smooth. https://i.imgur.com/UbTrXzd.jpg' alt='IMGUR>'> Right hand switches fitted. Took about 5 minutes, about an hour and 25 minutes quicker than last time. https://i.imgur.com/pGqcwMW.jpg' alt='IMGUR>'> Need to fit the left hand switch gear. I did the right hand controls first, as there's more wires and they have to exit the same hole. https://i.imgur.com/iyGw5SW.jpg' alt='IMGUR>'> Done. I'm so glad I got new bars, this is so much easier to route the wires down the bars. https://i.imgur.com/1tBQuzD.jpg' alt='IMGUR>'> On the bike. https://i.imgur.com/bYDEaoy.jpg' alt='IMGUR>'> Grips and mirrors next. https://i.imgur.com/etAoAvQ.jpg' alt='IMGUR>'> Left side, the easy side. https://i.imgur.com/9i7YdF3.jpg' alt='IMGUR>'> Right side took a little trial and error to get it to kit with no risk of the throttle tube getting stuck (took a little off the end). https://i.imgur.com/b8UvIkc.jpg' alt='IMGUR>'> The bike had god awful modern design levers from eBay. I got this replica master cylinder from David Silver. https://i.imgur.com/6jHv6ID.jpg' alt='IMGUR>'> Nice. https://i.imgur.com/5gH077v.jpg' alt='IMGUR>'> Clutch level mocked up (forgot to get a pivot bolt). https://i.imgur.com/hVrka13.jpg' alt='IMGUR>'> Looking good. https://i.imgur.com/sjJflaY.jpg' alt='IMGUR>'> Pattern part for the tank mount rubber. These are really expensive if you want NOS. https://i.imgur.com/4n8Bafq.jpg' alt='IMGUR>'> Lots of wiring in my future.
  11. Thank you. I saw someone post about riding to the Hebrides on reddit a few years ago, that really sparked my interest. I mentioned it to a buddy at work and that spurred him on to do his CBT and get a bike. I had two weeks off work for the holiday, but it was three days from Hampshire to Ullapool, arriving in Stornoway on the afternoon of the third day. We were in Glasgow my the end of day two. On the way back it was two days from Oban back to Hampshire. Yeah, he likes a bit of an adventure. He did Land's End to John O'Groats by bicycle last year. But it wasn't too bad for him as he started and finished near Birmingham.
  12. Working on the clocks this time. https://i.imgur.com/MbOhIOV.jpg' alt='IMGUR>'> OEM Honda parts. https://i.imgur.com/3nShvtB.jpg' alt='IMGUR>'> Replaced the back lights with LED so they will last longer. https://i.imgur.com/i5YSk7R.jpg' alt='IMGUR>'> Replaced the insulation on the back light wiring. This was brittle and useless. https://i.imgur.com/bAoLDFX.jpg' alt='IMGUR>'> As were the gaskets for the clocks. https://i.imgur.com/4MDXiKd.jpg' alt='IMGUR>'> I think the previous person to work on the clock glued these gaskets back on. https://i.imgur.com/Z9RylxJ.jpg' alt='IMGUR>'> I got them off in the end. https://i.imgur.com/OwXhuyO.jpg' alt='IMGUR>'> New gaskets. https://i.imgur.com/qKxtUJX.jpg' alt='IMGUR>'> Much better. https://i.imgur.com/2fXSJ5V.jpg' alt='IMGUR>'> https://i.imgur.com/jAuEKSQ.jpg' alt='IMGUR>'> Good seal. https://i.imgur.com/HwGZKgY.jpg' alt='IMGUR>'> Testing. https://i.imgur.com/3qTmZ5w.jpg' alt='IMGUR>'> More testing. https://i.imgur.com/VaBV21E.jpg' alt='IMGUR>'> The fasteners are wrong and the fitting hardware has seen better days. These parts are all still available and are cheap. https://i.imgur.com/rtdMzTF.jpg' alt='IMGUR>'> New grommets, two per clock. https://i.imgur.com/mxnLGlp.jpg' alt='IMGUR>'> Collar, two per clock. https://i.imgur.com/jMVJldN.jpg' alt='IMGUR>'> Acorn nuts, two per clock. https://i.imgur.com/Ix0SjJd.jpg' alt='IMGUR>'> Clocks back on the bike.
  13. Loads more bits to fit. New bars, replica indicators, replica left hand switches, new grips, clutch lever and adjuster. Replica indicator stalks, about 1/3 the price of OEM. The replica left hand switches is very good quality, and 1/5 the price of OEM. Loads more wiring to do. The rubber gasket around the clocks have perished and all four of the back lights have blown. New grips. I did chance a new throttle tube too, but I guessed the wrong size. The old one was fine and cleaned up well, so I reused that in the end. Replica clutch lever and new Honda adjuster and lock nut. The replica indicator lights are very good, and metal not cheap plastic. Other than not saying 'Stanley' on them, they look identical to OEM. The new indicators and rear light.
  14. Mine's a 2006 Honda XR125L (uses the same engine as a CG125) and my buddy's bike is a 2019 Mutt Motorcycles Blackest Sabbath (EFI clone of the GN125 engine).
  15. I forgot to mention that for some reason the bike had generic eBay special levers on it. I planned to replace them as a matter of course and included their cost in the negotiations when I bought the bike. At this point, I should just get work to split my pay and send it direct to David Silver and CMS NL. New (replica) petcock fitted. Seems to have a bit of a lean to it. I will see how it goes, but I may refit the old petcock and try to bend it back into shape (don't want to damage the new one). What I thought was a replica tail light lens turned out to be the whole light. I tried fitting the lens to the original Stanley light, but it didn't quite fit and I didn't want to force it, so fitted the new light. My new favourite tool. A label printer that can print on heat shrink tubing. This is a game changer for wiring in my opinion. Starting to fish out the extra crap from the wiring. This is just embarrassing. Permanent power for the indicators (why not switched?!?) that wasn't even crimped properly... a fire hazard in the making. That's not even making contact! Did I mention that I love this label printer? This isn't good. The stock wiring for the indicators has been cut, and cut flush. Extra wiring added for the stand alone indicator loom. It's been done fairly well, but did they really need to cut the stock wiring? There's not supposed to be a hole there. Going to need a new one of those. That's going to be expensive. All the crap removed so far.
  16. The scenery was just amazing though, would love to go back, and I'd be happy to do it on the same bike too.
  17. Yeah, just wish the weather had been a bit nicer. I didn't take any photos when it was raining, so all the photos make it look nice and sunny... But it was still enjoyable overall. I knew it was going to be colder up there, but I was surprised by just how much colder. I had to retune my carb twice, and buy a second sleeping bag to put my normal (and it's a good one, not a cheap synthetic one) bag inside for extra warmth. You live and you learn!
  18. Thank you. It was quite fun, when it wasn't raining. At one point (crossing the highlands) I was wearing a waterproof hiking jacket underneath my waterproof riding jacket and I was still soaked to the bone. But it wasn't continuous, so you had a chance to dry out over night. On the way back down it was just a nightmare, raining for about 48 hours straight. That's when we decided to hire a van, mainly to get out of the weather. Actually I kept a record! I used 64.8L of fuel, filled up 10 times, which cost £86.25. Total distance travelled (excluding the van from the lake district) was 1,345 miles. I averaged 103.5 miles per day and got 238 miles per tank on average (didn't want to push it and run out in the middle of nowhere. I reckon I could have got about 300 miles or close on a full tank). I averaged 89.96mpg (or 3.14L/100km). Cost roughly 6.7p per mile if you take into account the cost of the service prep work I did before hand (excluding tyres), so basically an oil change and brake fluid change.
  19. Thankfully a mate of mine has let me use his garage as this should be a 'quick' fix. Plus there's enough room in my garage to store the bike if I have to, but it would literally fill the last space in the garage with no room to move. So this would need to be quick so I don't outstay my welcome. I get a good chance to have a closer look at the bike. Missing tank rubber mount, those tiny bolts shouldn't be there. No cover for the battery, and the underside of the seat is metal. I order a strap and cover for it. The ignition switch isn't wired correctly. On closer inspection it's not OEM either. And this is when my plans fell flat on their face. That's the gear shifter shaft. It's not supposed to have a hole in it, and it's supposed to have splines. I assume the splines have been stripped and the hole was an attempt to put a bolt though the shifter and shaft to keep them indexed. I order a second hand part from the US with good splines. This takes a long time to turn up, naturally. The fuel hose redesign is leaking everywhere, but the bike does run. I believe the hose to be oversized, most likely an imperial size. I order new correct size hose and a replica petcock. Drain the tank... WTF?!?! That's a car coil! Sigh... I might leave this as the ignition systems seems to actually run sweet as a nut. I suspect I'll convert to electronic ignition at some point which will require replacing the coils anyway. I was really worried about all this black tape, but it turns out it was just to keep the tank from rubbing on the loom. The paintjob on the tank is rubbish, but I can live with it in the short term. the pinstriping on one side is painted, but it's sticky tape on the other.
  20. I have plans to build a workshop in the garden, but I need to cut down a hedge first. This has meant that my garage is full and there's no room to work in there. This has stalled my 1970 CB350K restoration project. The bike is a unicycle at the moment, so I can't move it. I spotted a 1973 CB350G in gumtree not that far away that was 'ready for an MoT' and wasn't too expensive. I could see there were a few 'weird' things going on with the bike in the photos, but contacted the seller to arrange a viewing. Got the cash from the bank, twisted a mate's arm to give me a hand, loaded the landy up with a few tools and a bike ramp and headed off to see the seller. This was back in the middle of September. The seller was a really nice old guy, over 80, who was giving up riding after having an accident (or a different bike). He had imported the bike from the US and already registered it in the UK. It had a few obvious issues that I spotted. The starter button was broken, so he had fitted a seperate starter button. There was an issue with the indicators, so that had it's own loom too. It also had the wrong indicators on it too. The tail light lens was broken. He had changed the configuration of the fuel hoses as he had replaced the petcock with a single output one (should have a dual output). I wasn't going to pay the asking price as it was quite a bit of work to put this all right, so we negotiated a bit and agreed on a price. It was starting to rain quite heavily at this point. Did the paperwork, exchanged cash, and loaded the bike into the back of the landy in near torrential rain. Thankfully the landy played ball with only the indicators being unhappy with the biblical amount of rain. I was glad I didn't have to unload in the rain.
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up