stevie16v Posted February 18, 2011 Share Posted February 18, 2011 Was balancing the carbs earlier, Been having issues with it not running right, Noticed the mix screw had to go in a fair bit, but also theres fuel coming up the vaccum line for balancing it, only happens on that carb, Is that a sign that its drawing too much fuel? Quote Link to comment Share on other sites More sharing options...
megawatt Posted February 18, 2011 Share Posted February 18, 2011 It's a sign that the float valve is open too far mate. Checkout the float level/position of the tang on the float pivot and compare it with the others. Check the seat and tip of the float valve for crud? Quote Link to comment Share on other sites More sharing options...
stevie16v Posted February 18, 2011 Author Share Posted February 18, 2011 seems fine, isnt coming out the overflow either, Already gave it a right good clean. Its holding the revs for quite a while if i blip the throttle aswell Quote Link to comment Share on other sites More sharing options...
megawatt Posted February 18, 2011 Share Posted February 18, 2011 You need to remove carbs , strip n clean em mate. Check diaphragms n seats especially. Usually you don't find anything, but it often fixes it??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.