Echoeone Posted August 21, 2011 Share Posted August 21, 2011 Hi - i have replaced the water pump on my ZZR1100D, because the old one was leaking and also the oil and water was mixing. As I had altready changed the head and head gasket, this looked a likely cause. Having put it all back together, the bike starts but on checking in the rad filler top - there is no movement of water as there normally is. Couple of other things, the red low oil pressure light does not come on before I start the bike up now [ used to so presuming sender ok ] and also if I put the bike in gear [ when the engine is not running ] and pull the clutch in the back wheel is still engaged. As the new water pump is all fitted and engaged to the oil pump, I pressume there may be an oil pump prob - ie if that is not turning then the water pump cany? How would I check if the oil pump is working? Any other thoughts welcome as the old haynes offers nothing in this areathx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.