dazza_b Posted February 6, 2012 Share Posted February 6, 2012 Hi, i was looking to get a new exhaust for my bike cause it is quite quiet and i prefer a slightly louder one (feel it makes people more aware of me on the road).i have a pulse adrenaline (yes i know chinese, but i wanted something to get my through my test and i knew a dealership owner who sold me one at trade price new) anyway back to the topic,does anyone know if the original exhaust on these have silencers?, if so would anyone be so kind as to tell me how i would take it out?. if not looks like ill buy a new end can.Thanks Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted February 6, 2012 Share Posted February 6, 2012 yes it does have a silencer it is the large section of the exhaust going to the rear of the bike and i doubt very much if you can get an aftermarket end can for it Quote Link to comment Share on other sites More sharing options...
dazza_b Posted February 6, 2012 Author Share Posted February 6, 2012 i have seen a few videos on youtube with people that have fitted different exhausts onto it and with ease by the sounds of it, surprised me when i found out that other exhausts fit on it.but im guessing that with what you said, i wouldn't be able to just remove it? Quote Link to comment Share on other sites More sharing options...
megawatt Posted February 6, 2012 Share Posted February 6, 2012 Pix would help? Quote Link to comment Share on other sites More sharing options...
dazza_b Posted February 6, 2012 Author Share Posted February 6, 2012 will take some tomorrow if they will help, too dark out to get a good pic of it, tomorrow morning should be better though, i have just found this though, someone recommended i get this end can for my bike + there are vids of this on the same bike as mine on youtube.http://www.ebay.co.uk/itm/180800600260? ... 1423.l2649not too sure about it though being a copy Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted February 6, 2012 Share Posted February 6, 2012 no you cant just remove it and use the bike without it being there at all but also looking about the cost of replacing it is hardly worth it Quote Link to comment Share on other sites More sharing options...
dazza_b Posted February 7, 2012 Author Share Posted February 7, 2012 but surely at £35 it wouldn't exacty break the bank, i have seen people buy the full yoshimura exhaust system for there bike costing a few hundred for the sound and performance.plus i will use this bike for atleast another 12-24 months as i have only just got work and can now start to affored my test, bigger bike and new gear etc (not that i had old stuff to start with but would like a new helmet if i go for a bigger bike) Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted February 7, 2012 Share Posted February 7, 2012 it is your choice of course if you think it is worth it then go for it is the bike fuel injected or carbed and will it need any upjetting or re-mapping for the new exhaust,but yes £35 isnt bad price to have a go and see if yo like it or not Quote Link to comment Share on other sites More sharing options...
dazza_b Posted February 7, 2012 Author Share Posted February 7, 2012 As far as I know it doesn't need anything doing other than removing the old end can and replacing it with this one, and changing the bracket places due to it being a much shorter exhaust.I have been told it helps the bike run smoother in the lower reps, don't know how true this is, it couldn't do that being just the can could it?. An the only thing putting me off is me making a right bad job of it, don't want to damage the bike Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted February 7, 2012 Share Posted February 7, 2012 if the can you are putting on is made to fit your bike you shouldnt mess it up and it should come with the fixing bracket needed to fot it all up i looked at soem on youtube and where the can ends behind the side panel only thing i thought was the heat affecting the panel could ruin it Quote Link to comment Share on other sites More sharing options...
dazza_b Posted February 8, 2012 Author Share Posted February 8, 2012 That was another thing that bothered me too, but with the standard exhaust, it is nearly touching the same panel but a but further back, I may just think on it for a bit, no need to rush into anything I guess, thanks for your help though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.