cockercas Posted October 19, 2014 Share Posted October 19, 2014 Just ordered a new -1 front sprocket. Anything else I need to order to fit it? Seals/washers etc. thanks. Quote Link to comment Share on other sites More sharing options...
Joeman Posted October 19, 2014 Share Posted October 19, 2014 A long breaker bar! The but will be done up pretty tight..Also, if your speedo reads off the front sprocket you'll need a speedo healer. Quote Link to comment Share on other sites More sharing options...
Stu Posted October 19, 2014 Share Posted October 19, 2014 A long breaker bar! The but will be done up pretty tight.. vaseline too then Quote Link to comment Share on other sites More sharing options...
Joeman Posted October 19, 2014 Share Posted October 19, 2014 A long breaker bar! The but will be done up pretty tight.. vaseline too then Lol stupid predictive text... Quote Link to comment Share on other sites More sharing options...
cockercas Posted October 19, 2014 Author Share Posted October 19, 2014 Old ones off. I just put a bit of wood through the swing arm and used a 2ft bar and it came loose. Cleaned the masses of crap out off there to. Cadwell next Monday so I can try it out. Going to go +2 on the back over winter to. Quote Link to comment Share on other sites More sharing options...
Joeman Posted October 19, 2014 Share Posted October 19, 2014 Which bike is it?In went -1/+3 on my gixxer 600. Made the bike a lot more frisky. Great fun!I'm a firm believer that all bikes leave the factory with too high gearing just to satisfy EU noise and emmisions regulations. Quote Link to comment Share on other sites More sharing options...
cockercas Posted October 19, 2014 Author Share Posted October 19, 2014 Cbr600rr. I don't get to use the top end on the track so might aswell get a bit extra lower down. Il take my old stuff just incase I don't like it, can soon swap back. Quote Link to comment Share on other sites More sharing options...
Stu Posted October 19, 2014 Share Posted October 19, 2014 you wont have no problem with that gearing at cadwell just take it steady at hall bends the hairpin and barn as you will easily spin the rear in the wrong gear and with it all been under trees Quote Link to comment Share on other sites More sharing options...
cockercas Posted October 19, 2014 Author Share Posted October 19, 2014 Yer, I don't think I will but if I start focusing on stuff I can't ride. Last trackday they put the wristbands on to slack. It's all I could think about because they had sat funny on my wrist. I just couldn't ride. Got them changed and then I was back to normal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.