cockercas Posted January 7, 2015 Share Posted January 7, 2015 I've got track fairings now and r&g crash bungs/sliders of my road fairings.Would you fit them to the track fairings? A good crash could turn bad if they dig into the grass/run off. If not I better find some 12mm bolts. Quote Link to comment Share on other sites More sharing options...
Joeman Posted January 7, 2015 Share Posted January 7, 2015 Nope, track fairings get scuffed up you stick some more stickers on them!!As you say, bungs could flip the bike and smash it to bits.. Quote Link to comment Share on other sites More sharing options...
Stu Posted January 7, 2015 Share Posted January 7, 2015 no dont fit them! as you say they will dig in then flip the bike over and if its at speed it will total the bike! I have seen it happen way too often at race events my mate wont run them for this reason Quote Link to comment Share on other sites More sharing options...
Joeman Posted January 7, 2015 Share Posted January 7, 2015 my mate wont run them for this reasonIt's the reason I've not fitted them to my bike. One side I could afford to replace, but if it flips over a few times its an insurance job Quote Link to comment Share on other sites More sharing options...
cockercas Posted January 7, 2015 Author Share Posted January 7, 2015 Bolts it is then. Better go to Scott's on the way back from hospital tomorow, thanks chaps. Quote Link to comment Share on other sites More sharing options...
fq-craigus Posted January 7, 2015 Share Posted January 7, 2015 Engine sliders ftw plastics are cheap compared to the casings ect Quote Link to comment Share on other sites More sharing options...
cockercas Posted January 7, 2015 Author Share Posted January 7, 2015 There on the list Quote Link to comment Share on other sites More sharing options...
fq-craigus Posted January 7, 2015 Share Posted January 7, 2015 :thumbup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.