MyNameJack

Again that night when I turned the bike on and started I was talking with someone so I didn't notice the pump priming and now after the bike has cut out on me I can't get it to prime so I'm thinking dead pump usually, the noise from the pump is noticeable and not quite its usually always something I wait to listen to then start the bike up but as mentioned above I was talking with someone at the time

Yes, there's a half tank of fuel yes there's Oil yes the battery is good. (sorry thought I would answer the more basic questions) took the side ferrings off just now and double-checked all the connectors to make sure nothing was loose and the same issue persists. the startup is ok no noise from pump and starter keeps turning

Hello, I tried starting my bike today, and it fired up as usual. However, by the time I got out of the garden and to the entrance of the road, it cut out randomly. I thought, “Oops, I must not have had high enough revs,” but when I tried to restart the bike, it just kept cranking over and over. There’s plenty of battery power, but it won’t run. I turned the ignition off and back on to try again, but still nothing—it’s cranking over but won’t fire up. What I noticed the second time when turning the ignition off and back on again is that I can’t hear the fuel pump priming. My immediate thoughts are that either a fuse or relay has blown randomly, or the fuel pump has died. Do any of you have any suggestions on what I can try? There’s a spanner logo on my HUD, but I think it’s due for a service regardless. I can check with an OBD scanner to see if I get any error codes tomorrow. Heres a google photos link with a video of the bike cranking over https://photos.app.goo.gl/VqjCFKFjQ6phrY2M6