Deano966

Ah i see must be relatively new then, this is the newest bike I’ve owned to date most have been pre 2016 so all had standard braking system

Thank you for the reply, I get what you mean I was only bleeding the rear calliper nipple it was spitting out brake fluid but not firming up, I wouldn’t have thought the second nipple on front calliper would be associated with rear brake, seems more complicated than it needs to be lol, I’ve done brakes on bikes before but this seems overkill, I press brake lever open nipple close nipple then release brake

I have a keeway superlight 125 2021 how do you bleed the brakes I notice the front brake has 2 bleed nipples and the rear brake has 2 brake resivours I’ve managed to bleed the front brakes but not the back it’s not becoming firm

thank you for the reply, I only have one key for the bike, I haven't actually checked the ignition wiring just thought worse case scenario as I had a friend from work with similar problems he installed a toggle switch as a short term fix and it solved the problem, ill have a proper look at the wiring

my 2006 ybr 125 has started to develop an issue with the ignition, when i turn the ignition on the bike will turn over but wont fire so i turn the ignition off and on again and it will start, sometimes when i turn the ignition on the neutral light wont come on but when i wiggle the key the neutral light comes on allowing me to start the bike, im thinking of installing a toggle switch but wanting to keep the ignition in place and keep the key, does anyone know how i would go about this and what wires i would need to take from the ignition and join to the toggle switch please

i have a 2006 ybr 125 carburetor engine but wanting to go fuel injection the 2007 model ybr 125 has fuel injection could i just do a straight swap take the fuel injection from the 2007 model and put it on my 2006