suz gsx 600 f 88

[Guest]

does any one know if this bike has a manual cam chain tensioner and where it is on the bike.

[Guest]

Hi mate, theres a manual on here for the GSXF,

your engine has an automatic adjuster, same engine as me...

http://www.themotorbikeforum.co.uk/view ... 27&t=21817

look at the engine from the back, and you should see it under the carb chimneys..

you can replace it with a manual item.. but I haven't

[Guest]

Thanks alot, i think it is loose as theres a bit of a rattle do you know if there is anything i could do with the auto 1 to try and get it working again.

[Guest]

Thanks alot, i think it is loose as theres a bit of a rattle do you know if there is anything i could do with the auto 1 to try and get it working again.

 

remove it, and give it a clean, then refit but make sure it goes back properly.. i.e closed then it will adjust itself accordingly..

could be as its an old GSXF the chain is out of adjustment life... have a gander at a haynes manual, and check out Oldskoolsuzuki.info, go to "infoBoard", "Oil Cooled" they will have a definative answer...

also check your oil level, low oil gives some strange noises... and an oil change is a worthwhile job...

where bouts are you?

and are you hanging around?

[Guest]

I am looking for a manual tensioner and they don't seem to have the 1988 part only newer versions would the newer ones fit my engine.?

[Guest]

genuine suzuki tensioner '88 GSXF600

1281026E00 TENSIONER, CAM CHAIN

Genuine suzuki tensioner '94 GSXF600

1281026E00 TENSIONER, CAM CHAIN

genuine suzuki tensioner Pre K Bandit 600

1281026E00 TENSIONER, CAM CHAIN

SAME ENGINE, SAME PART

[Guest]

thanks know any good uk places to get from.

[Guest]

just as cheap to get an original as it is the same price... part numbers above. approx £40..