Guest Posted May 23, 2010 Posted May 23, 2010 hey, a few questions here about my yamaha dt mx 50 1993 (love it to bits, except for its recent seizure =( previous owners neglected quite a few things). if i get a performance exhaust and possibley performance air filter too would it be necessary to upjet the carb? before you say get a bigger bike i will, but im keeping this as a project, it being easy to take to bits its a good one to practice on, anyway, any input is greatly appreciated, Quote
eastanglianbiker Posted May 26, 2010 Posted May 26, 2010 they also made a dt80 which you can fit the barrel piston and head straight onto the bottom half of your engine you will need the carg as well if you go that route if yu only go wit exhaust and air filter you will need to up jet the carb and also adjust the needle height in the carb Quote
Guest Posted May 28, 2010 Posted May 28, 2010 fitting a fibre reed valve is a simple and common mod, did same with my MTX50 way back when... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.