stevie16v Posted January 3, 2011 Share Posted January 3, 2011 I definitely seen something on this before but can't find it now.Long and short.In neutral, clutch out theres a rattle (known fault) clutch in, its fine.Kick it into first, Clutch out its pretty much fine, running a bit rough but thats because im working my way through sorting it. Clutch pulled in, the wheel still keeps spinning, not as in just a little bit, its as though theres still power going to it. Is this going to be the clutch release bearing? or something elseIts a 93 plate XJ 600 diversion s Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted January 3, 2011 Share Posted January 3, 2011 does it only do it when on the stand,off the stand can you select neutral and first gear without the bike trying to creep forward it is quite normall for the rear wheel to spin on the stand in first gear with clutch in if you touch wheel with ur foot it should stop Quote Link to comment Share on other sites More sharing options...
stevie16v Posted January 3, 2011 Author Share Posted January 3, 2011 I've not tried it with it on the ground to be honest. (havent had it on the move yet) I touched it with my foot and it did stop. I'll get it down and give it a try when i get a chance Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted January 4, 2011 Share Posted January 4, 2011 if it stopped with your foot it is normall transmission slack all bikes do it and so do cars if one drive wheel is jacked up in the air Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.