tps sensor

[big jay]

hi guys ,newbie ,hope your all well have a 96 cbr1000f ,im not very tech savvie so hope im in correct section .on me second 1000f first one built from a scraped bike ,lots of fun my issue is can find no info in any manual or carb expert online about the tps sensor on me keihin carbs ,seems all the blades and 600fs have voltage parameters in the manuals except my 1000f .so i am guessing is it a self regulating tps i know some set themsleves from the throttle position and dont need to be calibrated ? even a honda tech bloke could find no specs for it .also wondered as were in the uk what you guys run your pilot screws at ,the manual says adjust carb 3 on revs etc but its near on impossible as even with a long reach carb screw thingy you still cant get in there properly ,ive set mine to 3 turns out but have not taken her out yet ,carbs cleaned and balanced .any advice be great ,ps have done the stick coil conversion seems to fire a lit better ,

[big jay]

Its ok problem sorted ,anybody needing info on the tps sensor set up i found it in the 1997ft adendum ,if you need it i can pass the info on.

Edited May 30, 2023 by big jay

[StevebCBR]

I could do with the tps settings if you have them still I had carbs off to clean forgot bout tps so need to calibrate it