Foz Posted September 11, 2010 Posted September 11, 2010 (edited) bit not like any cut out i've come across!!its a 1996 GSF1200 banditi will come to a stop and it will, over the space of about 2 seconds, drop in revs then cut out....it doesnt always do it though!also i noticed, when in gear with the clutch fully in, if i rev it, it will still pull foreward slightyl!makes me wonder if the clutch thing is making it stall at a standstill?its a hydraukic clutch so i dont see any way of adjusting it cheers all Edited September 12, 2010 by Foz Quote
eastanglianbiker Posted September 12, 2010 Posted September 12, 2010 sounds like it could be clutch drag and as its hydraulic it could well mean time for new set of clutch plates Quote
Guest Posted September 12, 2010 Posted September 12, 2010 change the fluid, to rule that out, but yes, sounds like its the clutch Quote
Foz Posted September 12, 2010 Author Posted September 12, 2010 is it normal for the clutch to go at 24k miles?? i cant afford new clutch plates Quote
Foz Posted September 12, 2010 Author Posted September 12, 2010 well i changed the fluid this afternoon! was a nice and easy job anyway, the old fluid...was black!! i don't think its ever been changed!! i put new fluid in and took it for a test ride, everything is as it should be! no cutting out, when holding the clutch in and revving, it no longer pulls at all!! wit will be tested furthercheers for the help you two! i will probably need a lot more with my new GTR project Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.