Rear paddock stand

[Donnie Brasco]

Hi guys,I bought a CBR125R recently(still kept the gilera), I'm after a stand to make it easier to lube the chain,I have seen a few on the bay in the £20 mark some hold the swing arm and some hold the bobbins,are these universal and the holders can be adjusted to the width of the bike?

I don't want to end up sending it back as it'll cost a fortune so what's your view on this one for instance?

http://www.ebay.co.uk/itm/BIKETEK-MOTORBIKE-MOTORCYCLE-REAR-PADDOCK-TRACK-STAND-/190610687711?pt=UK_Motorcycle_Parts&hash=item2c614846df

Cheers

James the caveman.lol

[Nogin]

I got a £20 one that lifts my swingarm for my cbr600 and is fine!

That will be more than fine for a125

[eastanglianbiker]

yea that should be fine for the cbr125 as long as the arms go in far enough to sit the swinging arm into

[Donnie Brasco]

as long as the arms go in far enough to sit the swinging arm into

 

That's the actual problem Steve,I would imagine that the holders would slide in and out to fit the width of each bike?that's how looks on the photo

[JamBerryKing]

the arms are usually adjustable, and go quite far. Im sure the 125 isn't that skinny?

[megawatt]

Looks like my paddock stand. The pads slide in and out. If I were you I would either cover the pads with foam or tape to stop em scratching the swingarm. If you can fit bobbins to your arm , I would buy hooks with the paddock stand.

[Donnie Brasco]

I see Megawatt,when I come to think of it I don't really need one but I'll probably get one,thanks for all the comments guys