Guest Posted February 1, 2013 Posted February 1, 2013 I just had a restrictor kit put on bike and now the bike wont stay with the revs without the choke on jus a little tiny bit ...is it gonna affect my bike riding with the choke on a little bit otherwise the engine dies.? Quote
eastanglianbiker Posted February 1, 2013 Posted February 1, 2013 have you tried turning the idle(tickover) up slightly? look into the carbs from the left hand side there will be a cable there to adjust tickover turn it clockwise to increase tickover Quote
Guest Posted February 1, 2013 Posted February 1, 2013 Ohh okkay ill try that in the morning thanks ill come back to this topic if i have any more problems Quote
Stu Posted February 1, 2013 Posted February 1, 2013 have you warmed it up properly? with it been dold it will take some warming up Quote
Guest Posted February 1, 2013 Posted February 1, 2013 Yer it has been warmed up but still as soon as i turn choke of it dies . Before i had the restrictor kit i cud warm it up and it wud then sit at 1 and half revs. But jus dies now ..but untill i find problem is it gonna affect my bike having choke on a tiny bit which keeps it at 1000 revs Quote
Stu Posted February 1, 2013 Posted February 1, 2013 as whats already been said above turn your idle screw a bit to raise the tick over speed they may have taken the screw out to fit the restrictor kit as some have a idle screw fixed to the bikes frame Quote
Colin the Bear Posted February 1, 2013 Posted February 1, 2013 The first bit of the choke just opens the throttle and raises the revs doesn't it? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.