Dynamo_Delboy Posted August 30, 2013 Posted August 30, 2013 Probably a pretty silly question here but does anyone know how to get the casing from the number plate light on a 1992 cbr600f2 off? My bulb needs replacing but can't figure out how to get into the thing.Its driving me up the wall.Nothing in the service manual about Any help would be great thanks Quote
Adam Posted August 30, 2013 Posted August 30, 2013 You don't need one to pass an MOT.. So you could just leave it. Quote
Stu Posted August 30, 2013 Posted August 30, 2013 If it's their it has to work You may need to remove the full housing to get in it its not something I have had to do to be honest all my bikes have a tail tidy and no light! Quote
Adam Posted August 30, 2013 Posted August 30, 2013 Mine doesn't work cause I cut the cable off and it passed.. But if that is the case just get an led light instead Quote
acting_strange Posted August 30, 2013 Posted August 30, 2013 You don't need one to pass an MOT.. So you could just leave it. I'm sorry but you have always needed a number plate light to pass an MOT....if those that passed youyr bike did so witha failed light then they could be done by the ministry.. Quote
Stu Posted August 30, 2013 Posted August 30, 2013 they could be done by the ministry.. If the ministry can prove it wasn't working at the time of the MOT obviously a cut wire wouldn't but a blown bulb could have been Quote
Lumor_uk Posted August 30, 2013 Posted August 30, 2013 my cbf number plate light is the actual rear red light. maybe same on yours? either way the rear light cluster has to come off. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.