littlecat Posted November 23, 2013 Posted November 23, 2013 Well we've been over today and started sorting it.Managed to free up the hydro lock, only one cylinder was affected.The tap is definitely bolloxed, so we've brought it home to strip down .All in all removed over 10 litres of fluids from the engine. Quote
OhJay Posted November 23, 2013 Posted November 23, 2013 Thank you Stu, your suggestion of a nut on the end of the crank shaft was a saviour. Able to turn the crank with no sticking at allTook the cover off at the end of the crank and fuel poured out the hole from the sump! Quote
Stu Posted November 23, 2013 Posted November 23, 2013 yeah the fuel will have gone into the cylinder and past the rings into the sump if you can I would put just a couple of drops of oil into the cylinder just to lube it up as you turn it over as the fuel will have washed all the oil away Quote
eastanglianbiker Posted November 23, 2013 Posted November 23, 2013 definatly a few drips of oil into each chamber before trying to start it as bores will of been washed clean of oil and will wreck bore/rings if you dont use oil first Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.