Guest Posted March 3, 2014 Posted March 3, 2014 hi there i have a dt lc 125, ive changed the plug,it wants to start but it doesnt seem to be getting petrol through to the carb. can anyone help please ? Quote
Adam Posted March 3, 2014 Posted March 3, 2014 Right, firstly is it the right plug? Have you put the cap back on properly? Did it start fine before or is this a recurring problem? A little bit more info and we might be able to help Quote
Tango Posted March 3, 2014 Posted March 3, 2014 Welcome to TMBF mate....pop over to the Newbies section and introduce yourself when you get a chance...... So....if there's no fuel getting to the carb....check the fuel tap and inline fuel filter.....and make sure none of the fuel lines are kinked.....also try it with the filler cap open in case the tank breather is blocked and there's a vacuum in the tank..... Quote
Guest Posted March 10, 2014 Posted March 10, 2014 Hi thanks people for the help, i found the brass like slider in the top of carb was getting stuck, ive cleaned the whole carb in boiling water, rubbed down the slider and it seems to be great, will find out. Tomorrow thanks again , martin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.