Exhaust Clamp

[Glorian]

Long story short,

Didn't take whole exhaust off in the end just cleaned the rust off under the bike as best I could, put new exhaust on (yay) sounds amazing, but I'm getting some fumes escape where I have swopped the link pipes over, old one was nice and snug, new one is a bit smaller so I put some gun gum stuff in there it helped for a while but I think I need to put some more on. Also I need a better clamp I think as the one I got is just a U shaped clamp and not the BEST fit, now can anyone recommend somewhere to get a good clamp that's ideally large enough to cover some of the rusty parts of the collector box, needs to be 60mm diameter.

Will get a photo up later might make this a bit easier to understand.

[GaryJM]

http://www.mandp.co.uk/index.php/default/shop-bike/exhausts.html?p=2

Also Wemoto http://www.wemoto.com/components/clipsandcirclips/hoseclips

Or various types on ebay

[Guest]

Depending on the setup of the pipes you may need a gasket;

http://www.ebay.co.uk/itm/MOTORCYCLE-EX ... 5d494d3f25

[Glorian]

Depending on the setup of the pipes you may need a gasket;

http://www.ebay.co.uk/itm/MOTORCYCLE-EX ... 5d494d3f25

 

That's what I'm probably needing! Top marks mr Phil

[Glorian]

http://www.ebay.co.uk/itm/111378943212? ... Track=true

I'm thinking something like this.

[Stu]

you need a new gasket in there and a new clamp on it

the one phil linked to is pretty much the same as the one you need