steve__b Posted January 31, 2016 Posted January 31, 2016 Tried to start my YBR 125 but has fault code 19...no signal from ignition to ECU.It would not bump start. I might try switch contact cleaner in ignition key barrel. I am not mechanically good enough to take things apart so mght end up using my breakdown cover to take to garage repair place. Has anyone else had this problem ? How much would this repair cost ? Quote
Tango Posted January 31, 2016 Posted January 31, 2016 Switch cleaner up the ignition barrel should sort it out ok........otherwise it may need a new ignition switch..... Quote
CGD217 Posted February 3, 2016 Posted February 3, 2016 Hi mateNot sure it is related but I had a YBR a couple of years ago. Just over a year old and it wouldn't start outside the Yamaha dealership. They had it for a couple of days and came to the conclusion it needed a whole new loom. I hadn't had any problems up till then. All done under warranty on a 62 plate. Not sure if it's something that could be checked. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.