Guest Posted May 12, 2009 Posted May 12, 2009 Help needed - I have removed the carbs and now come to refit and when re connecting the throttle cable I have a brass coloured clip which I know I took off but cannot remember where it goes, have checked the Haynes manual but it does not show it. I think it may go on the adjuster but cannot see how it fits. Any help would be good or even better a photo.CheersSteve Quote
Guest Posted May 12, 2009 Posted May 12, 2009 Hi Walney,It's at the carb end, I will take a photo and post tonight.CheersSteve Quote
Guest Posted May 12, 2009 Posted May 12, 2009 Here are a couple of pic's of the part and the end at the carbs. Quote
Guest Posted May 12, 2009 Posted May 12, 2009 Here are a couple of pic's of the part and the end at the carbs.XW, how about PM Akey, he's a triumph tiger, so might have come across this before... Quote
Stu Posted May 12, 2009 Posted May 12, 2009 does it go over the nipple on the end of the cable ? some cables have this as they are a universal type 1 Quote
robbie o.gorman Posted March 7 Posted March 7 i find it hard to get the 10mm spanner on lock nut i feel if tight you could leave clip off Quote
robbie o.gorman Posted March 8 Posted March 8 22 hours ago, robbie o.gorman said: i find it hard to get the 10mm spanner on lock nut i feel if tight you could leave clip off Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.