sam64
-
Posts
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Community Map
Posts posted by sam64
-
-
-
thanks hodgy .
-
hi everyone my son has just got himself a Honda cbr 125cc.The bike has a dipstick to check the oil all of my bikes ive had have a small glass window does he still have to stand the bike upright to check oil level cheers sam
-
hi everyone i"am looking to up grade the headlight bulbs in my fazer fzs600 year 2000. Any advice on which one are good and any to avoid ? cheers Sam.
-
ok thanks
-
hi my son"s just about to fit new LED indicators to his bike are they a straight swop ?
-
replaced the battery with one i no was charged still went dead.
-
hi guys my son picked up a bike Saturday, secondhand but it keeps loosing power took the battery off charged it up, bike started up ok drove it to work today then went for some fuel bike started up then lost power again . battery is flat. can anyone help.
-
-
hi guys set off for work this morning started the bike up it started on third attempt normaly first time, started to move off the speedo arm starts jumping all over the place at one point i"am doing 140 mph them after 5 mins it settles down and works ok then this evening going to guildford it does the same thing anyone know what it could be. sorry forgot to say the bike is a fazer 600 year 2000
-
offside bulb housing screw was loose done it up seems to of pulled the bulb around now looks straight
-
Pissed off bike has just failed mot . headlamp aim beam kicks up to offside should be an easy fix. Not so i have a custom front end the headlights dont have any means of adjustment going to have to adjust the hole front end some how. anyone got any tips for getting them set-up.
-
the bike has"nt got a temp-gage and i was just running her on tickover .
-
hi guys hope someone can help my bike fazer 600cc seems to get very hot not shore if this is normal or not had her running today for about 15 mins fan came on and she was very hot . water levels are o.k.
-
-
hi guys looking for some downpipes for my fazer 600 year 2000 not stainless used secondhand that can be done-up .looked on ebay but no luck.
-
ok cheers guys
-
just standard downpipes not stainless going to clean them up their in good nik going to spray them black do i need some sort of under coat first
-
hi guys just got me new exhaust well its second hand but new to me. needs some TLC going to paint it can anyone give me some tips ECT. cheers steve
-
hi bob the oil level is ok, bikes done 10,000 miles just got the bike back from garage the head had to be removed because one of the spark plugs snapped now the clutch is making quite a noise.Rideing to work today had a couple of stops at traffic lights when moving off bike felt a bit juddery as clutch was relested.
-
can anyone help got a 2000 fazer 600 cc its got a nocking or tapping noise from the engine but when i pull the clutch leaver in the noise go's any ideas anyone.
-
What bike is it?
If possible I think you would be best to remove the head. If you drill the remains you could get swarfe down inside onto the piston where it could do a bit of damage. Screw extractor of the correct size is probably the best option.....but take it real easy, you don't want to damage the head or the plug threads.
Just a note of caution...
Bob
its a yamaha fazer 600cc year 2000 think i"ll phone the garage in the morning get them to do it i really dont belive what i"ve done.
-
just snapped spark plug in housing now dont no what to do the thred is still in but nut came out any help totaly pissed off
-
ignition barrel
in Pitstop
Posted
just removed the top yoke to fit my new ignition barrel but cant get the barrel off the yoke two bolts they look like security ones anyone no how to remove them .They look dome headed can anyone help ..