cypek

Thanks for your advice guys. All my idle / cutting out problems are sorted. The reason of it was incorrect spark plug fitted by previous owner (gap twice as big as it should be ) and I just adjusted mixture properly and its spot on now Although I agree this tapping noise is pretty loud. I will look at it when I find some spare time. @Gamer - oil level was ok and I also recently changed it at 700 miles so it definitely is fine:) Also from what I found on internet on CG125 engine choke won't increase revs. (Lumor_uk confirm??)

Buy DVD from here: Amazon link £4.99 and free delivery

£75 or £88.50 evening and weekend

Unless he is prepared to do it 5 times I also do some practice in a car park between white lines

I have a Duchinni also... damn its noisy... I am happy my bike wont go over 55 as my head would probably explode

Right, as DVLA f**ked my Counter Part and I couldn't book my theory test because I am not in their database I went to their local office today. My Counter Part was sent to their headquarters to be checked/registered/replaced/ So after 2-3 weeks (I hope maybe sooner) I will be able to finally book my theory test Watch this space

My suggestions would be to start checking from the beginning... Start switch, wires, starter motor. Could you try to maybe push start it? Someone here suggested once to try and roll a bike on gear to check is everything inside engine can move smoothly. Thats just my thoughts as a non mechanic but a bit handy person Good luck

Don't worry too much about it. I too have to jump between 1st and 2nd a few times before I find neutral I'm getting better with time as I'm getting used to my bike and the same will be with you Keep riding

I wanted to book my theory test today but was unable over the internet and over the phone As I have foreign licence DVLA sent me UK counterpart but it seems they forgot to register it or something I spent 1hr on the phone calling DVLA only to been told I am not on the system at all I will have to send my counterpart back to them with a letter and will have to wait till they sort it F**K IT

Not as expensive as most of yours but fits and looks good and I like it

It does say And helmet I will definitely get a pair of trousers as I ride in my normal jeans now Also could do with a pair of boots instead of my work safety boots Lol I didn't check when this sale starts and I just went to my local store to find nothing But as the weather is beautiful I just had a great ride Even got 2 nods but out of 6 so the score is not perfect lol

Looks like all is fine Found with my friend Google: Thanks everyone

Any thoughts anyone, please?

Thats the problem, they doesnt increase. I need to twist a grip to hold the revs up. They increase when I switch choke off Bike is Kaisar 125-23, body is a copy of CBR125 and engine is a copy of CB125

I don't think I will find Haynes for a chinese bike unless I could use a Honda one... CB125 I would say??

I am not sure if its connected properly but I know it works in some way. Like I said when its cold I can only start my bike with choke on. The way it works on my bike is this: I start the bike with full choke (but also I need to keep revs up by twisting grip) After 30sec - 1min (depends on temp) I can switch it off and after another 30sec - 1min I can release grip and bike wont cut off There is no other position than "full on" or "off" on my choke as I feel. When I move lever by 5mm from "full on" position, revs are going up a bit and there is no difference at all if I move it to "full off" or back to "95% on". Lol I hope you understand my descriptions, I am still having some holes in my english vocabulary And don't get me wrong, it isn't really some big issue. It would be just nice if I could pull a choke, then start my bike while putting on my helmet and gloves.So is it some carb fault? Can it be adjusted? Should I just get a carb from original CB125? Any other thoughts would be appreciated

Hi everyone. I have managed to sort my cutting off problem and my bike is running fine now Question I have now is what may be wrong with choke? My bike won't start without adding some revs but with it starts first time and without any problem (when cold and choke on). I can live with it but its just a little annoying. There is a lot of free play on my choke switch like 35-40%. Not sure is it normal? Also, when I start my bike with choke on after about 30sec - 1 min I can switch it off and when doing it revs are shooting up??? When I had my air filter box off I have seen choke is closing air intake as it should but I think revs should increase as well, right? What may be the reason of this and possible solution? I am pretty sure there arent any more screws on my carb I can play with Thanks for any advice

A little update. Well, when going to work yesterday bike felt a bit better. It died 2-3 times but I think that could be due to too low idle set by me. When riding back home on the evening it also died 1-2 times but again, I am unsure as I may not let it warm up properly. I will start it in a minute, warm it up and go for a ride to check. Also I am not really sure about choke. I still keep my bike in the kitchen so it starts ok when I take it outside but when I'm trying to start it after work I need to use a choke. Problem is I can't just start it as it wont hold revs up on choke. There is no difference in revs when choke is on / off. But when I pull choke while riding bike dies instantly and starts only with choke after my work so it seems choke is working in some way??? I'm so confused... EDIT: Ok, just had a nice ride and it seems problem is sorted. Looks like revs were set extremely low. When I started the bike they felt like 2-3k (my rev counter lies) and they didn't change after 10 minutes of stationary running. But after a short ride it started dying again and I noticed revs were really low so I turned them up to when it sounds as a nice tickover EDIT2: Would you say its a bit too high? I would... http://www.youtube.com/watch?v=m-eWdrfgEcM Ok, I think I will get the revs a bit down. But woohoo, looks like just some fine tuning left for me and I can enjoy some riding

Tank is over half full. Well, there was one of them hoses on top of old filter that looked like it was folded in half. Could be that when I sit on bike that hose was squashed even more. But I have changed it for much longer one when fitting new filter just now. Maybe that will solve my problem. When I start the bike it can run for 10-15 minutes without any problem so it seems to be only riding problem. Thanks. Will let you know after work if the problem is still there.

Thanks, than I fiddled with correct screw. Any idea what may cause this cutting out when riding? I have just fitted new fuel filter and as it is clear one I can see petrol flowing as it should on idle but my problem is only when riding

Another picture from top: red arrow - screw I adjusted; yellow arrow - strange knob?? http://img10.imageshack.us/img10/843/gorao.jpg Also I checked fuel filter and I dont think its good that its empty inside? Another thing, is it normal there is no any on/off tap under tank? There is some bit with 2 pipes going to carb but it cant be locked? Although when I removed tank, petrol isnt leaking...

Looks like I played with mixture screw then. But is it normal when I turn it revs will go up? And I didnt really notice any other screw I'll go and have a deeper look I've also sprayed WD40 around air filter box without any result. Also my sparkplug has been changed by previous owner to NGK. Thanks EDIT: here is marked screw that I played with. Picture is from right side of bike http://img197.imageshack.us/img197/2559/prawar.jpg Here is picture from left side of bike. Only other thing that looks like it may be some sort of regulation it knob marked with arrow Maybe anyone else will see something I missed http://img63.imageshack.us/img63/5277/lewym.jpg

Hi guys. I have a problem. My bike is cutting out when Im riding. It starts ok and tick over is fine when stationary. I would say there is something wrong with carb as choke is also a bit different as it should be. When I switch choke on I can't hear any revs increase but I know it works as when starting bike after being parked a few hours outside I need choke to start it. But I also need to keep revs up by hand. I've tried to increase revs regulating carb but it doesnt help. When I start to ride its fine for a few minutes but then as soon as I engage clutch and release acceleration it dies. I need to stop then, move choke lever 2-3 times and it starts again and I can ride until I want to slow down / stop again. After a few times its getting harder to start it and then it starts dying while riding just like it wont getting any petrol. Any help would be appreciated. Thanks Oh and bike is chinese 125 with old CG125 engine copy

Have a look in here. I've bought mine helmet from them http://www.jsaccessories.co.uk/dsShop.aspx?shopid=8 12 stores nationwide, ebay store, good choice and low prices

Anyone knows by a chance how exact those copies usually are? I am thinking about swapping a few parts for original CBR125 parts like instrument/clocks panel, maybe rear swingarm, brakes. With a few better quality bits I can make cheap semi-decent bike out of it lol Cheers