alexanderfoti Posted February 2, 2011 Posted February 2, 2011 HII have taken some pictures and have outlined the areas that I need a pipe fabricated for.I will be able to get some more accurate lines/measurement when I get the actual can in the post http://i53.tinypic.com/yncdj.jpghttp://i52.tinypic.com/1z1vdow.jpghttp://i56.tinypic.com/2qnxh0p.jpgLEt me know if the pictures are too rubbish and Ill get some bigger ones. Quote
megawatt Posted February 2, 2011 Posted February 2, 2011 Pix look useful mate, need some with cover off if poss. Once I know what pipe to order can you either take detailed measurements or preferably bring/post it to me? Quote
alexanderfoti Posted February 2, 2011 Author Posted February 2, 2011 Pix look useful mate, need some with cover off if poss. Once I know what pipe to order can you either take detailed measurements or preferably bring/post it to me? Yeah no probs, Will get the measurments of diameter and cover off pics tomoz. Probs wont be able to send you the exhaust as I commute on the bike every day Quote
alexanderfoti Posted February 2, 2011 Author Posted February 2, 2011 Right, any ideas how im going to get internal diameter without taking the pipe off? Would be annoying to take off, measure, then put back on again ... Quote
megawatt Posted February 3, 2011 Posted February 3, 2011 Sorry Alex, we need the exact size of the o/d of the header pipe or the link pipe i/d. Preferably measured with digital caliper or a very precise steel rule.!They should be the same! We also need the same for the other end of the link pipe! There's no other way of doing it mate. Quote
alexanderfoti Posted February 3, 2011 Author Posted February 3, 2011 Sorry Alex, we need the exact size of the o/d of the header pipe or the link pipe i/d. Preferably measured with digital caliper or a very precise steel rule.!They should be the same! We also need the same for the other end of the link pipe! There's no other way of doing it mate. No worries, gona get my hands dirty on Saturday getting it apart then Quote
megawatt Posted February 4, 2011 Posted February 4, 2011 Gimme a bell when you do mate. I may also need some angles and some piccies Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.