Need a strain relief grommet for headlight unit cable

[Grumpy Old Git]

Says it all in the title - This is for a 1974 MZ250 TS

Nearest I've found so far is an old Iron lead grommet - It will need 'adjusting' but may do the job.

Any other suggestions welcome?

[acting_strange]

here is one answer....http://www.maplin.co.uk/strain-relief-grommets-1780

and here is another http://uk.rs-online.com/web/c/cables-wires/cable-glands-strain-relief-grommets/

[Chrissb6]

RS or Maplins should be able to sort you out. Just make sure you get the right size for hole and cable. Some of the clamps l've come across factory fitted l have to say! Have almost cut the cables in two.

[Joeman]

Failing that, some rubber tube and a couple if cable ties.

The tube could extend a short way (like they do on irons) to prevent the cable bending too sharply.

[Grumpy Old Git]

here is one answer....http://www.maplin.co.uk/strain-relief-grommets-1780

and here is another http://uk.rs-online.com/web/c/cables-wires/cable-glands-strain-relief-grommets/

 

Neither of those are any use - Thanks for trying though.