bmwdave Posted March 11, 2016 Share Posted March 11, 2016 I've called them heel plates, the panels on the side of the bike that both sets of pegs are fixed to. There were already marks from constant contact with my boot heels, and although the panels appear to be solid metal - I thought alloy like the wheels - the surface coat has come off where its been rubbed by my boot and along the top of the piece they are both corroding and the top coat of whatever, paint?, is all bubbling up. Its a 2008 BMW by the way. Does anyone know what these pieces are made of, and what the best plan is for treating the corrosion. Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted March 11, 2016 Share Posted March 11, 2016 chances are they will be either alloy or cast can you not get them powder coated ? Quote Link to comment Share on other sites More sharing options...
Fozzie Posted March 11, 2016 Share Posted March 11, 2016 I expect them to be made of ally but could be wrong. Is there orange rust, or pale pitting? Easiest way to tell.I use a brass wire cup polisher to smooth the surface and then use a couple of coats of hammerite stone chip. Always provides a good smooth finish and lasts a while, the good thing is you just top up every time your boots wear through. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.