EthanKing Posted March 29, 2016 Posted March 29, 2016 Just realised tonight that I have to pull my front brake fully in before my brake light comes on. I'm assuming this is a fault as it seems dangerous to me. Is the switch located in the lever or elsewhere? It's an 06 YBR125. Thanks. Quote
Stu Posted March 29, 2016 Posted March 29, 2016 it should be under the lever and not normally adjustable is it the stock lever? Quote
EthanKing Posted March 29, 2016 Author Posted March 29, 2016 Yeah it all looks standard. I'm going to have a look in the morning, I've been using my rear brake slightly just to light up the brake light. Quote
Chrissb6 Posted March 29, 2016 Posted March 29, 2016 Hi as said there normally none adjustable, but you could try giving the switch a good clean with some WD40 or contact cleaner. There's a possibility that the switch is crude up with grime making it stick and less responsive. Hope this helps Quote
iangaryprice Posted March 29, 2016 Posted March 29, 2016 The metal contacts in the switch are starting to wear away. New switch should sort it, not too expensive. Quote
EthanKing Posted March 29, 2016 Author Posted March 29, 2016 Going to pull it apart tomorrow and see how the contacts are. Thanks for the info everyone. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.