lyncho1983 Posted July 25, 2017 Posted July 25, 2017 Hi all,ive just purchased a tw125 and from what I understand its the same carb as whats on the sr125.my issue is that if its been sat overnight when its started in a morning the slightest touch of the throttle and it stalls. it does this until its warmed up then its fine. the other issue is the revs are hanging quite bad.my first thoughts are that I need to clean the carb but this is my first bike and this is something ive never done before, how hard is it to do?im mechanically minded and ive worked on cars for years but when it comes to bikes im a complete novice.thanksdarren Quote
TimR Posted July 25, 2017 Posted July 25, 2017 Are you using the choke ?And the sr carb had a habit of the choke mechanism not latching .. used to use a clothes peg/ crocodile clip to keep it out on my old one Quote
mike_1984 Posted July 25, 2017 Posted July 25, 2017 I have a sr125 and mine is the same if its cold, usually 30 secinds or so just ticking in neutral does the trick , not having the rev problem though. Quote
lyncho1983 Posted July 26, 2017 Author Posted July 26, 2017 I need to use the choke first thing in a morning but only for a short time then it ticks over fine but when you give it the slightest rev it stalls.once its warm it doesn't need the choke. if you rev it whilst its stationary the revs only hang for a couple of seconds but if you ride it and stop the revs hang for longer.thanksdarren Quote
lyncho1983 Posted July 31, 2017 Author Posted July 31, 2017 morning all.does anyone have any tips/diy on how to remove and strip down these carbs.I wont have any concerns doing it myself just need to know where to start really.thanksdarren Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.