indicator spaceing

[craig]

just taken my r+g tail tidy off ,and replaced it with an evo-tech one.

Before my indicators where at the side of my number plate but now with this new one they are above the plate and only stick out a little bit past the plateso as there short ones but there still visable .....this legal or not........

[Stu]

if they are visable then i dont see why not

dont forget mine are in my rear light and are MOT approved

[craig]

cheers stu ,i will get the name of the mot place when its due as i don,t want to be taken my can off either

[Stu]

just take the front wheel in it will pass

[Guest]

technically your indicators have to be a minimum of a legal sized numberplate apart. So if yours poke out the side and you have a full sized plate you should be ok, if you running a small plate then the should be further apart.

Can you not fit the std rear end and indicators for your MoT?

[Stu]

it will be fine come MOT time trust me

if mine is ok as it is im certain yours will be

[craig]

indicators now stick out further ...........fitted a smaller plate

[Guest]

Hahaha, hope your MoT peeps are friendly then?

[craig]

in the worst case i,ve still got all my standard bits ,just alot of messing about changing them back

[Stu]

when is MOT due craig ?

[handyandy24]

ye there them ones for the zx7r which is basically the same size back light but acts as indicators as well and they are less than the width of a number plate

[craig]

when is MOT due craig ?

not 4 ages stu.......some time next march

[Guest]

ahhh loads of time then, soz misunderstood thought you had it soon