WkdBen

Thanks for all the advice everyone! Ill be using it all hopefully tomorrow if I have time and when the weather is good enough. Ill be sure to report back after!

Thanks for all the advice! Ill give this ago tomorrow if I get time! and i took the tank off because the choke wasnt and still isnt working however before I could find the problem it started to rain

Spark plug seems fine, sparks against the bike frame so I'm assuming it's all good! Thanks for the response:')

I haven't dropped it or bumped it at all, tank is also half full. I haven't checked the fuses so I'll give that ago! Thanks for the response

Hi ., I take it yours is a carbed version, so you should be looking at fuel delivery, are you getting fuel to the cylinder, taking out the spark plug and seeing if its wet, could be a start, also while its out check for a spark by pushing it back into the plug cap and earthing it on the bike frame, if you got a spark when you turn the engine over ,then you can look at the carbs Hello! Thanks for the response, It is the carbed version. I've checked the spark plug against the bike frame and it sparks with a blue spark. Also the plug is dry when I check it after attempting to start it. I took the tank off a week or so before the bike stopped starting and I think I rode it for roughly 40-50ish miles after that.. Would it run for that long if it was kinked?

Hello, I recently bought my first ever motorbike however very slowly regretting getting this particular bike because of all the problems I've had with it. Basically it doesn't want to start anymore, if anyone can give me any advice then it would be much appreciated! Im taking it to a garage mid January however id rather fix the problem myself if possible. "> Here is a link to the video of me trying to start it. The spark plug sparks with a blue spark, and also when I try the spark plug is dry when I check it. Any help would be appreciated!

Hey! Will do! How would I go about Dremeling it? I was just wondering were to start, Also would heat be a viable option?

https://imgur.com/a/1tfBc" onclick="window.open(this.href);return false; Basically I bought my CBR a few months ago. I knew that it needed a bit of tlc work but about a week ago the downpipe literally fell off from one weld next to the exhaust and from the initial end part that fits onto the engine. The problem is when removing the rest of the downpipe I found out the piece is stuck/ possibly fused with then engine and I have no idea how to remove it.. The link at the top has picture of the piece that I need to remove. I don't know if a motorcycle garage would be pricey or not either. Any and all advice is welcome!