mytrenis

Hi all Im after 1200GS so if anyone is selling or know anyone selling let me know

Would you know a place in London or around where they could mill it out ? If the price is right would go for it

that bearing has ID of 20mm where i need 25mm, they do have seals for bearing i am after but no bearing itself

Ho Im doing front end conversion on my er6 2010. And now looking for a front rim, since zx6 yokes take 25mm axle and my current rim is 20mm. But i just tough of taking er6 6004 (20x42x12) and replacing it with 6905 (25x42x12) one. Only concern is will this bearing do the job for me? I read some forums and found some info on it but no exact answer. And anyone would know where i could find 6905 bearing as it seems like there is only 2 options costume made one for£100 a piece, which is not worth the trouble. Or getting one from China, which would take ages to get here and would want to try avoid it. Help appreciated

Looks good . I have someone but it clamps over bar. Didn't like it as every time i had to take my eyes completely of the road to have a look at it.

I cant do that as i will have to take fuel tank and air box off to get access to the plugs

What would i have to do after removing plugs ? If its hydrolocked

Its been a 2 weeks now. Kill switch was the first thing i have checked. Have learned from my mistake [sMILING FACE WITH OPEN MOUTH] Pulling plugs is a problem. To take them out i would have to take fuel tank and air box out to get access to them. Silly design

Thats what i tough, that cylinders might be full. But then starter would work i think, Thats why i recon its something electrical.

Thanks for suggestions. Will try all this over the Weekend. Ordered multi-tester so will check if all connections are alright too

Hi there everyone Got a little problem here so tough someone might help me you with this one as i have no clue what it could be. So will start from the beginning. Low sided my Ernie (er6n) Hit the curb with rear wheel which destroyed it, left hand handlebar bent in half too. rest of it just cosmetics. The only thing bike desnt start anymore. Engine not damaged and everything else looks alright. So thought something might be wrong because bike spend long time on its side about 1 hour. Checked wires and they look intact. but to shore. When i turn the key fuel pump goes on and everything else as it should but starter doesn't turn when i try to start it. I tried everything i could from my knowledge and been told few other riders but nothing. So tough asking here might help. Thanks for Replays in Advance

Good to know there are like minded people around me Next time it will be then

Anyone I could join in tomorrow ? Im from Romford

Thanks for all replays. Yes i am. First it cracked and i couldn't get myself to fix it. So after some time down pipe broke complete and was hanging there. And yesterday on the way back from work it snapped and i lost it while driving. Already ordered new one so will get it done over weekend.

is it safe to ride with out down pipe for couple days until i get new one ? 100 mile ish ?

I wouldnt mind joining

Drained it. And there is no traces of water. Could it be that fuel doesn't get to where it needs. like fuel filter needs to be changed, but i read that it is build in to the fuel pump so all fuel pump would need to be changed.

no sore if i can do that. because to get accses to plugs i need to take of tanks and air box and disconnect all of them. is the any other way of doing it?

Kill switch was first thing i check has happen to me on my first 125 years ago. Fliped the switch by accident while riding. Ended up in the middle of the road called my dad who came with a van and took it home where started taking it apart n Just changed the spark plugs and still the same thing. Starting to think its fuel that doesn't go though, but not sore. How i could check if fuel goes as it should ? thanks

good try yeah will try spark plugs and check fuel filter maybe thanks

Morning all So got a problem with my er6n. Tried to start it last morning but it wont start. First thing tough about battery, but not the case this time. Battery is full and healthy. Starting to think i about fuel system. As i filled up full tank just day before and got home from work (30 miles) and next morning it didn't start. Any ideas Thanks

Thats the thing its empty there is no left to see it

Hi everyone, hope you are enjoying todays weather. bought my bike couple days ago and decided to do some work on her. already changed oil and noticed that i need some collant, but i have no manuals on me. what coolant should i top up? best regards miytrenis

and another question was doing my mock test and got a question about witch sounds like this you did your test and now got full license, what is the lowest capacity bike you can ride on motorways i pressed 125cc, but at the end it said it's wrong and that you can ride 50cc on motorways who is right me or software? thanks

That is what i thought because i remember that i read somewhere about it. but just wanted double check Big Thanks Davefly76