Guest Posted May 10, 2010 Share Posted May 10, 2010 It seems as the fuel pum is priming but no fuel is getting injected through. Would this be a sensor or the actual injection module playing up, it was intermitant but now a constant problem. thanks for any ideas Quote Link to comment Share on other sites More sharing options...
Guest Posted May 11, 2010 Share Posted May 11, 2010 has it got fuel...?how much? Quote Link to comment Share on other sites More sharing options...
Fozzie Posted May 11, 2010 Share Posted May 11, 2010 Is the starter motor turning over the engine? Is there any firing?Need a lot more details to help you out there! Quote Link to comment Share on other sites More sharing options...
Guest Posted May 11, 2010 Share Posted May 11, 2010 hi, engine turns over, and spark plug firing (took out to check ) pump primes, but engine does not start i guess fuel not getting called for from injector, is that aproblem with ecu or injector itself?thanks Quote Link to comment Share on other sites More sharing options...
Fozzie Posted May 11, 2010 Share Posted May 11, 2010 The injector may have failed.Have it checked out, replace the injector as it sounds like that has packed up. If that doesnt work then look into the ECU. It has to be one of the 2...Also, just to clear up any other silly possibilities, you havent got a fuel tap have you and switched it off rather than to res or on? Just a possibility. Please check it.Kill switch?What about your kick stand? How is the battery?Try and bump it! Quote Link to comment Share on other sites More sharing options...
Guest Posted May 12, 2010 Share Posted May 12, 2010 hi, thanks for info. will try and check out the injector with meter and copare readings with manual info. there is no fuel tap or kill switch on this bike, bit strange but original i believe. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.