Cb500 twin headlight conversion

[boyant]

hi guys

ive recently completely done up the cb500 paint work and all and have installed a twin dominator headlight

the main problem im having is when taking off the stock headlight to put the dominator on there are wires everywhere i have tried to pull all the wires next to the tank but there is still quite a bit of wiring. (main loom)

has anyone got any ideas of how to make it ether less wiring ( no i cant cut them all of LOL )

or how to make them less obvious do u think it would be ok to just ether mask them all up black ( like the bike) or spray them black ?

thanks in advance any suggestions will be appreciated im literally about to give up lol

a beer to whoever has the best idea

Thanks

Ant

[bullet5]

Don't paint them black! The wires are colour coded so it will make it a nightmare in the future to locate certian wires without rubbing the paint back off them, and looking at a lot more loom. Tape would be the best option. If you have some space in your dominators you could try to push sume of it in there. Tape sounds liek the best option though, and make sure you don't pull any tight! You don't want your throttle jamming open.

[bex]

can you not shorten them a little? if not then black tape will be about the only option. i wouldnt suggest pushing the wired up into the light as i know there aint much room in there and it could get hot and melt them