keith565 Posted January 10, 2013 Share Posted January 10, 2013 well, just need to know when changing a sump oil seal gasket do i need to use anything else such as a sealer etc.long story, but i overfilled my sump and blew the gasket, glad it wasn't anything worse. Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted January 10, 2013 Share Posted January 10, 2013 you can smear a very light coating of proper gasket sealant round both faces of metal but if you have bought a genuine gasket and not a pattern one then it might already have a line of sealant round it Quote Link to comment Share on other sites More sharing options...
keith565 Posted January 10, 2013 Author Share Posted January 10, 2013 It's a genuine guzzi part. Quote Link to comment Share on other sites More sharing options...
Colin the Bear Posted January 10, 2013 Share Posted January 10, 2013 It used to be recommended to smear the gasket with grease. It helps it to release next time and maybe get a couple of goes out of it. Don't know if it's appropriate here. Quote Link to comment Share on other sites More sharing options...
Tango Posted January 10, 2013 Share Posted January 10, 2013 It used to be recommended to smear the gasket with grease. It helps it to release next time and maybe get a couple of goes out of it. Don't know if it's appropriate here. I guess that Keith is hoping not to have to take the sump off again.... Only ever had to take the sump off a bike once before......after I overdid the sump plug.......hence the reason I use a torque wrench all the time now..... Anyhoo.....most bikes these days will only need the gasket without any sealant.....gone are the bad old days of poorly machined mating surfaces..... Quote Link to comment Share on other sites More sharing options...
keith565 Posted January 11, 2013 Author Share Posted January 11, 2013 It used to be recommended to smear the gasket with grease. It helps it to release next time and maybe get a couple of goes out of it. Don't know if it's appropriate here. I guess that Keith is hoping not to have to take the sump off again.... Only ever had to take the sump off a bike once before......after I overdid the sump plug.......hence the reason I use a torque wrench all the time now..... Anyhoo.....most bikes these days will only need the gasket without any sealant.....gone are the bad old days of poorly machined mating surfaces..... indeed, I'm hoping never to have to do this again,lol.thanks for the info, ill pop it on at the weekend and let you know how i get on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.