Guest Posted February 14, 2013 Posted February 14, 2013 Okay, so I swapped out my old busted DT125R engine for a DT125X engine, and most of the wiring, but out of the engine comes the green AC supply from the engine generator which is suppose to go to the Rectifier Regulator, witch in turn charges the battery. So I can't figure out how to get it to there and it doesn't seem to react with any of the other wires, any help would be awesome. Quote
Tango Posted February 14, 2013 Posted February 14, 2013 Welcome to the Forum mate........ I'm not sure what you mean....so maybe a few piccys would help identify where your problem is...... Quote
Tiggie Posted February 14, 2013 Posted February 14, 2013 a service or haynes manual might be a good idea Quote
eastanglianbiker Posted February 15, 2013 Posted February 15, 2013 have you traced the wire correctly or had the bike running to see if it has a current output on it as often the 3 wires coming out of the generator go into a single plug and are all yellow in colour and the green one is often the neutral light switch wire Quote
GazW Posted February 15, 2013 Posted February 15, 2013 What year is your bike an what year is the new engine? Could have a different wiring loom Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.