Ricky Posted February 27, 2013 Posted February 27, 2013 Hello, well after hours if searching through ebay, biketrader, guntree etc I couldn't find a cheap restoration to hopefully learn the basics on so I've decided to restore my peugeot XR6 yes I know it's not a classic yardy yardy ya and I won't make any money on it *yawn* but it's more of a learning curve this is the little honey It's not in the front room or anything it's in my den sort of thing where I go chill with my mates etc http://img842.imageshack.us/img842/1227/imagedgcu.jpghttp://img4.imageshack.us/img4/15/imagezaqg.jpgAny help and advice on how to start it or paint ideas or anything I could find helpful?I've printed if the engine manual (minarelli am6) and the peugeot XR6 owners manual:)Thanks all:) Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 Called into work so didn't get much done http://img703.imageshack.us/img703/9882/imagekgv.jpgAlso are these forks alright or will they need to be re sealed?http://img201.imageshack.us/img201/2676/imageqlaa.jpg Quote
Tango Posted February 27, 2013 Posted February 27, 2013 They're all bikes mate.......don't matter what size engine, style or age...... Clean the forks up and then have another look.......could just be accumulated cr*p on there...... Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 They're all bikes mate.......don't matter what size engine, style or age...... Clean the forks up and then have another look.......could just be accumulated cr*p on there...... I'll clean them all up tomorrow, you've been a great help to all my questions so far greatly appreciated =) Quote
Tango Posted February 27, 2013 Posted February 27, 2013 No probs mate......you got that cylinder head bolt yet? Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 No probs mate......you got that cylinder head bolt yet? Came today, but it's not like rest it's just a nut not like the other which are nuts with like rubber tops everything else is right though, would it matter not having the rubber tops?If I send it back they will charge 4.00 P&P and charge 20% inconvenience fee.. Which would make it 13.06 for four washers and a nut -_- Rip off merchants =p Quote
Tango Posted February 27, 2013 Posted February 27, 2013 Not entirely sure what you mean by "rubber tops"......but I'd give it a try and see if it goes on OK...... By the looks of your thread I'm guessing it'll be a while before you can try it out though.... Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 Not entirely sure what you mean by "rubber tops"......but I'd give it a try and see if it goes on OK...... By the looks of your thread I'm guessing it'll be a while before you can try it out though.... That's the new onehttp://img12.imageshack.us/img12/5316/imagewidh.jpgThe other ones;http://img40.imageshack.us/img40/3241/21292886.pngExcuse my drawing =DYeah, but the state of it from the top pictures was disgraceful Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 http://www.ebay.co.uk/itm/Peugeot-XR6-5 ... 20cbfa4a2dThe bolts look like that in the picture of that ebay page... =p Quote
Tango Posted February 27, 2013 Posted February 27, 2013 OK...so it just looks like some kinda grommit to stop cr*p getting in there......try it out and see how it goes..... Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 Slight problem;Bike has been take apart ;D Quote
Tango Posted February 27, 2013 Posted February 27, 2013 Slight problem;Bike has been take apart ;DYeah.....I kinda noticed that..... Quote
Ricky Posted February 27, 2013 Author Posted February 27, 2013 I've got a mate who's mate is spraying the frame, he does it to a near pro level he is trying to start his business up I've seen his work and it's pretty suburb and is charging 70 quid does that sound about right? Quote
Ricky Posted February 28, 2013 Author Posted February 28, 2013 http://img839.imageshack.us/img839/3165/imagekrvv.jpgYay!I can't tell you the stress u went through to get that out! Been busy today the frame has been completely stripped and is being sprayed on Friday! Quote
eastanglianbiker Posted February 28, 2013 Posted February 28, 2013 is it a seperate bracket section that is broken then that needs welding/replacing?? because if its part of the main frame that needs doing before you paint it Quote
Ricky Posted February 28, 2013 Author Posted February 28, 2013 is it a seperate bracket section that is broken then that needs welding/replacing?? because if its part of the main frame that needs doing before you paint it Yes that is separate all the frame breaks down into pieces which really frustrated me, that has been taken off since that picture as the spray painter guy told me too as well =) Quote
Ricky Posted March 1, 2013 Author Posted March 1, 2013 Hi guys I need to clean up various parts off the bike to make them shiny and look nearly brand new such as the engine and plastic alloys I've been told use Metal alloy cleaner can anyone recommend a good brand of the stuff and where to get it? Quote
Ricky Posted March 2, 2013 Author Posted March 2, 2013 Hi guys I know the majority of you aren't interested in seeing my thread at the top all the time and thinking to your selves 'waste of money, time and effort' get a bigger bike if that's the case please pass on by Back to the topic in hand, I've been told the bike frame has been primed and is going to start painting on Monday.The main question is would you suggest me paying ridiculous rates on getting the engine fully rebuilt and cleaned or would you suggest me attempting to completely rebuild the thing myself? Opinions appreciated and I like both types of feedback so I know what I can do better in the future. Quote
Benn Posted March 2, 2013 Posted March 2, 2013 The main point of this 'restoration' is for you to learn as much as possible right? You'd probably learn more rebuilding it yourself than someone else doing it. I don't know ANYTHING about engine rebuilding though, so my advice may be bad Quote
Ricky Posted March 2, 2013 Author Posted March 2, 2013 The main point of this 'restoration' is for you to learn as much as possible right? You'd probably learn more rebuilding it yourself than someone else doing it. I don't know ANYTHING about engine rebuilding though, so my advice may be bad Yes, that's mainly the point but I don't particularly want to put the gearbox in backwards or get the timing wrong etc there's loads of things that can go wrong, I'm going to get all the necessary tools I need before I start it =) Quote
acting_strange Posted March 3, 2013 Posted March 3, 2013 The main point of this 'restoration' is for you to learn as much as possible right? You'd probably learn more rebuilding it yourself than someone else doing it. I don't know ANYTHING about engine rebuilding though, so my advice may be bad Yes, that's mainly the point but I don't particularly want to put the gearbox in backwards or get the timing wrong etc there's loads of things that can go wrong, I'm going to get all the necessary tools I need before I start it =) Of course there are loads of things that can go wrong...loads of things go wrong everyday, it's part of life....It's how we learn and develop new skills.....like building motorcycles!Take you time over it, dont rush, make sure you understand what you are doing before you actually do it and you will make less mistakes and feel proud when you have finished.. Quote
eastanglianbiker Posted March 3, 2013 Posted March 3, 2013 and if u r not sure take lots of pics as you take it apart so u have a reference for where and how everything goes Quote
Tiggie Posted March 3, 2013 Posted March 3, 2013 keep things you have taken out together and spaced in the order they go as well Quote
Ricky Posted March 3, 2013 Author Posted March 3, 2013 Way ahead of you guys got a folder on my computer full of pictures and what goes where and different things laid out on tables in the order they go in Quote
Ricky Posted March 3, 2013 Author Posted March 3, 2013 Way ahead of you guys got a folder on my computer full of pictures and what goes where and different things laid out on tables in the order they go in Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.