Matt Strange Posted August 30, 2014 Share Posted August 30, 2014 This happened a while ago, I found the picture on my old phone yesterday so I thought I'd make a thread about it.My project Fireblade (RRX) decided to stop charging its battery, so I did a quick check and low & behold the reg/rec is shot and has taken out the stator wiring plugs along with it. This actually passed an ohm test on the stator wiring at the stator plug! (the two burnt plugs live under the seat behind the battery). It was only when I went to check the output of the stator with a voltmeter set to A/C that a problem manifested itself (less than 60v ac @ 5000rpm).Just goes to show the importance of testing a live circuit rather than a static ohm test. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.