johnnyturnip Posted February 4, 2015 Posted February 4, 2015 HelloI'm looking for safety switch on an an 04 daytona 600 I've been told it's the clutch lockout switch to start the bikeCheers in anticipation Quote
eastanglianbiker Posted February 4, 2015 Posted February 4, 2015 there could be 2 switches you mean one will go into the back of the clutch lever and will be a microswitch and there will also be one down on the sidestand Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 It's the microswitch on the clutch then. I've just done a few searches and come back with nnothing.Thanks for your help Quote
eastanglianbiker Posted February 4, 2015 Posted February 4, 2015 should look like this pushed into the back of the lever next to where the clutch cable goes in http://www.ebay.co.uk/itm/Triumph-Dayto ... 1818wt_958 Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 Cheers I've rang triumph it doesn't come just as a switch on my bike it's connected the horn indicators etc... So a bit more then £15 lol Quote
Tango Posted February 4, 2015 Posted February 4, 2015 What about this? http://www.ebay.co.uk/itm/Triumph-Dayto ... 4d12b8876f Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 Cheers yeah I've looked at that tango think I'm just going to bypass it to be honest. Quote
Tango Posted February 4, 2015 Posted February 4, 2015 Bypass a safety device!!.......your trousers will fall down!!...... Quote
Stu Posted February 4, 2015 Posted February 4, 2015 If your going to by pass it then make sure its not wired in to the fuel injection system If it is then the bike will run in a neutral map and you will lose power, waste fuel and could damage the engine! Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 I'm not doing it myself lol... Quote
Stu Posted February 4, 2015 Posted February 4, 2015 Even so you still need to find out before you get it done! If it messes with the mapping then leave it alone! Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 Ok I'll speak to him in the morning but how would I know Before it was removed?.Cheers appreciate this Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 Just looked at a wiring diagram and my outcome of it is....not a fookin clue.. Any help??? Quote
Stu Posted February 4, 2015 Posted February 4, 2015 I dont have a clue without the wiring diagram what is the reason for disconnection? Quote
johnnyturnip Posted February 4, 2015 Author Posted February 4, 2015 I looked online mate..It's just broken it's been playing up a while now.Thanks for your help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.