Carburetor washer

[rice-pudding]

This little fella thought it would be funny to fall out when I was cleaning the carb, any idea where it's supposed to go?

http://i1220.photobucket.com/albums/dd448/jojo-clyro/Mobile%20Uploads/DSC_0077.jpg

[Stu]

Did you have the air screw out? Or the pilot screw?

[rice-pudding]

Yes I did, not sure what one it might be for. The pilot has a spring with a rubber o-ring and the air is just bare. The washer fits both, I'm thinking air?

[Mr Fro]

Probably goes on top of the spring (mine do anyway). See if you can find a microfiche with an exploded diagram to be sure.

[Mr Fro]

This look about right?

http://images.cmsnl.com/img/partslists/suzuki-gsf600-1999-x-carburetor-model-s_bigsue0053fig12_e57f.gif

29 is the o-ring

30 is the washer

[rice-pudding]

It's the carb on the YBR that I'm cleaning, can seem to find a washer on any diagram that I can find!

[Stu]

It goes between the spring and the o ring to provide a seal

[Stu]

See number 11 and 19 on here

https://www.motorcyclespareparts.eu/yam ... 55007.aspx

[rice-pudding]

Sorted now, the o-ring was stuck the carb in the hole, the washer must of been stuck too.

Thanks again for the help guys

[Stu]

That's usually what happens

You have to fish the seal and the washer out normally with a thin bit of wire

[rice-pudding]

Yeah I used a hair kirbee thing, atleast I'll know for next time. Just got to wait for the battery to come now and see if the old girl starts!