Thebear87 Posted January 18, 2018 Posted January 18, 2018 Hi I’ve got a RF900 and need to replace the forks. I’m looking for the simplest way doing it. Is there any other forks out there that I can do a straight swap. Thanks Paul Quote
fastbob Posted January 18, 2018 Posted January 18, 2018 Hi and welcome, I'm not sure if this is helpful or not . Are you building a street fighter or special or do you just need to replace some damaged forks ? Anyway, there are quite a few sets of RF 900 forks on eBay right now at reasonable prices. If you want to upgrade to upside down forks you're going to need yokes ,an axle, calipers , wheel etc. in other words a whole front end . Here you go http://i.imgur.com/dGbPFhy.png Quote
Thebear87 Posted January 18, 2018 Author Posted January 18, 2018 I’m just wanting to change them because the bike I’ve just bought has loads of pitting and rust. Was just wondering if any one new if 1200 bandit had the same or another bike had the same. But I don’t think they do. Quote
fastbob Posted January 18, 2018 Posted January 18, 2018 I’m just wanting to change them because the bike I’ve just bought has loads of pitting and rust. Was just wondering if any one new if 1200 bandit had the same or another bike had the same. But I don’t think they do. How much research have you already done ? I've just googled it and I can say with reasonable certainly that both 1200 Bandit and RF 900 forks are 43 mm in diameter. So that's a positive start , I'll leave it to you too compare all the many other dimensions. Wouldn't it be easier to just have yours re chromed and re ground ? There are many uk companies that offer this service as well as a rebuild with new seals etc. http://i.imgur.com/TZOX7S9.png Quote
Thebear87 Posted January 18, 2018 Author Posted January 18, 2018 I’m certain that the 1200 is shorter. But thanks I will look into it. Quote
fastbob Posted January 19, 2018 Posted January 19, 2018 I’m certain that the 1200 is shorter. But thanks I will look into it. Maybe they are shorter , and the caliper mounts , wheel diameter, axle thickness and clamping method, disk spacing , travel, damping characteristics, mudguard mounting points, type of speedo drive , spring compression rate and weight of the bike ? Quote
Chrissb6 Posted January 19, 2018 Posted January 19, 2018 Why not get them rechromed and serviced? Far safer than rolling the dice on the internet and potentially buying the same as what you've got now. Quote
megawatt Posted January 19, 2018 Posted January 19, 2018 Or buy a complete front end, with a possible swap of steering stem?Try to get on Oldskoolsuzuki or Oldskoolperformance forums or Facebook groups. Quote
fastbob Posted January 19, 2018 Posted January 19, 2018 Or buy a complete front end, with a possible swap of steering stem?Try to get on Oldskoolsuzuki or Oldskoolperformance forums or Facebook groups. Yep, see my ebay pic , £350 . Purple wheel included. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.