Turbodave Posted January 19, 2023 Posted January 19, 2023 Hi guys, I was fitting new indicators to a 2020 Bullit Hero 125 coz the both rear ones were damaged. I replaced the rear right-hand one ,the front right flashed but the back didn't,so I swapped the wires on the rear , great the right side works perfectly. Did the same on the left ,the front one flashes but the rear didn't so I swapped the rear wires around and Oh! The front one doesn't flash anymore. "Maybe this left rear is faulty" so I take another new indicator and wire it to the back left, no joy, switch the wires over, no joy. I check the right-hand side again,damn, it's not working. I pull and check all fuses,all ok. I check ,taillight,brake light,horn all still working,I start the bike,battery still strong. It was LED indicators already on the bike so I don't think I need to change a relay coz I'm installing new LED indicators. What could be wrong? Quote
hawkeye Posted January 22, 2023 Posted January 22, 2023 Probably a bad, just get a length of wire, touch it to the socket where the bulb is then on the earth terminal on the battery. Also make sure all the bulbs are the same wattage. 1 Quote
Turbodave Posted February 2, 2023 Author Posted February 2, 2023 Thanks Hawkeye , I've got them all working , the new indicator I was trying to fit on the back left was faulty. I just fitted another new one and all was working. 1 Quote
hawkeye Posted February 2, 2023 Posted February 2, 2023 Good to hear, electrics can be a PITA sometimes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.