Mr Goodwill Posted January 5, 2024 Posted January 5, 2024 Gentlemen, I want to install LIGHTBAR with two 55W halogen bulbs. Here below, I attached simple diagram how I want to connect the lightbar. The question is, is it OK to supply 12V to the bulbs from “POSITION LIGHT 10A ? Or, is it better to supply 12V directly from a battery (as shown in “green”) with extra 20A fuse. Please have a look. Cheers Quote
JRH Posted January 5, 2024 Posted January 5, 2024 Is this as well as the main head lamps or instead of? if as well as, separate switch and fuse, also check the alternator is ok with the extra load. if instead of I would check size of existing wiring. If you are replacing 1 head lamp with two. You are doubling the load. Quote
fredc Posted January 5, 2024 Posted January 5, 2024 (edited) remove the connection marked and its fine other wise the ignition will be on all the time Edited January 5, 2024 by fredc add text 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.