What security devices/disc lock would fit a honda cbf 125

[zee-659]

I recently bought an oxford monster disc lock after being recommended it on here but it wouldn't fit my bike, looking for any other good recommendations that would fit, also does anyone know if litelok x1 would fit the bike? 

[V650]

just googling images of the honda cbf 125 

The front disc does not have any biggish holes to put a beefy lock through so looks like maybe something with the smaller pin through the holes in the disc 

 

Think you might struggle to find something beefy with a small pin to go through the lock  but anything at all is a deterrent really 

https://www.xlmoto.ie/product/urban-brake-disc-lock-ur955-reminder-cable_pid-PIA-291881?utm_source=google&utm_medium=cpc&utm_campaign=[CO:IE][L:EN][CH:GG][CT:SH][ALL-IN-ONE][QT:B]&utm_id=18345052680&gad_source=1&gclid=EAIaIQobChMI3PSh8t2kiwMV8JxQBh27Ojx6EAQYASABEgJi5fD_BwE&gclsrc=aw.ds

 

You should prob try measuring the holes in the disc to see how thick a pin you can get through it 

 

 

Edited February 2 by V650

[bud]

I've just brought one of these from screwfix  of all places. https://www.screwfix.com/p/burg-wachter-heavy-duty-d-padlock-9-7cm-x-10cm/6240f

Good value for money. And it might fit behind the disc. But you would need to measure it. 

Or you might have to get a pin type one as mentioned above.  It should fit through the slots on the disc if long enough.

Edited February 2 by bud

[Ian Frog]

Have you looked to see if it will fit through any holes in the rear sprocket?

Not ideal I know and possibly a bit mucky but secure none the less.

Cheers

Ian

[Simon Davey]

3 hours ago, zee-659 said:

I recently bought an oxford monster disc lock after being recommended it on here but it wouldn't fit my bike, looking for any other good recommendations that would fit, also does anyone know if litelok x1 would fit the bike? 

 

Flippin' eck, I'm really sorry, that was my bad.

I'm surprised it didn't fit though, the shackle doesn't go through the actual round holes, but through centre pattern. I guess you tried everything of course.

Did you get your money back?

Edited February 2 by Simon Davey

[Shasel]

I use the REAP one on mine.

https://www.amazon.co.uk/REAPP-Motorbike-Reminder-Security-Motorcycle/dp/B09FX27K6P?th=1

[RideWithStyles]

On 02/02/2025 at 09:58, V650 said:

just googling images of the honda cbf 125 

The front disc does not have any biggish holes to put a beefy lock through so looks like maybe something with the smaller pin through the holes in the disc 

 

Think you might struggle to find something beefy with a small pin to go through the lock  but anything at all is a deterrent really 

https://www.xlmoto.ie/product/urban-brake-disc-lock-ur955-reminder-cable_pid-PIA-291881?utm_source=google&utm_medium=cpc&utm_campaign=[CO:IE][L:EN][CH:GG][CT:SH][ALL-IN-ONE][QT:B]&utm_id=18345052680&gad_source=1&gclid=EAIaIQobChMI3PSh8t2kiwMV8JxQBh27Ojx6EAQYASABEgJi5fD_BwE&gclsrc=aw.ds

 

You should prob try measuring the holes in the disc to see how thick a pin you can get through it 

 

 

Only 5-7mm pin disc locks will fit. And due to the groves don’t allow owt bigger or round in that space.

If you do get the strongest one possible other wise a decent lump hammer and swing will have it off in no time. 

U bar lock will have to have a small pin just to fit inbetween the disc and hub to lock.
Best way was a metre chain under 10mm links to feed it between the engine and around the manifold of the exhaust, through the wheel- anyone knows exhaust studs don’t come off easily

Edited February 3 by RideWithStyles

[zee-659]

22 hours ago, Simon Davey said:

 

Flippin' eck, I'm really sorry, that was my bad.

I'm surprised it didn't fit though, the shackle doesn't go through the actual round holes, but through centre pattern. I guess you tried everything of course.

Did you get your money back?

dont worry! i was able to get a refund it was a good recommendation

[zee-659]

24 minutes ago, RideWithStyles said:

Only 5-7mm pin disc locks will fit. And due to the groves don’t allow owt bigger or round in that space.

If you do get the strongest one possible other wise a decent lump hammer and swing will have it off in no time. 

U bar lock will have to have a small pin just to fit inbetween the disc and hub to lock.
Best way was a metre chain under 10mm links to feed around the manifold of the exhaust and through the wheel- anyone knows exhaust studs don’t come off easily

ended up getting a 10mm kovix knx10