andy ninja Posted September 25, 2008 Posted September 25, 2008 whilst repairing my bike after last weeks off i have found out that when you turn the steering side to side there is a notch in the centre there is no 'play' in it. i only noticed this whilst the bike is stripped of its wheel and fairing as it is now off the floor,, is it an easy job to do? and am i better off doing it whilst the wheel and nose fairing is off because as soon as i get my wheel its going on hopefully! any advice welcome or you can come do it for me lol! Quote
Stu Posted September 25, 2008 Posted September 25, 2008 may aswell do them while your waiting easy enough to do but the race on the bottom of the stem can be a bugger to get off Quote
andy ninja Posted September 27, 2008 Author Posted September 27, 2008 well people.. the job is done minus a roadtest and tightness re-check! all in all a resonably easy job to do i managed to get the outer shells out easily with a drift the main problems was getting the inner shell off the bottom yoke which i used a dremmel to cut a slit and prised it open.. and getting the new inner race over to the bottom of the stalk. soo thanks people for the advice, glad i attempted it!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.